5.0/ 5.0
100% pembeli merasa puas
21 rating β’ 6 ulasan
5(20)95.24%
4(1)4.76%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 8
Subtotal
Rp1.596.000
DFRobot : Analog Electrical Conductivity Sensor / Meter (K=10)
Rp1.596.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 04 - DFROBOT OFFICIAL
ππππ: πππππ ππππππππ πππππ ππππ ππππππππ ππ ππππ ππππππ πππππππππ
SKU : KB3002
CODE: DFR0300-H
FEATURES
3.0~5.0V wide voltage inputοΌ0~3.2V output voltage, which is compatible with 5V and 3.3V main board
AC excitation source, effectively reduce polarization
Gravity connector and BNC connector, plug and play, no welding
Software library supports single-point calibration, and automatically identifies standard buffer solution, integrates temperature compensation algorithm
Uniform size and connector , convenient for the design of mechanical structures
SPECIFICATION
Signal Conversion Board
Supply Voltage: 3.0~5.0V
Output Voltage: 0~3.2V
Probe Connector: BNC
Signal Connector: PH2.0-3Pin
Measurement Accuracy: Β±5% F.S.
Board size: 42mm*32mm/1.65in*1.26in
Electrical Conductivity Probe
Probe Type: Laboratory Grade
Cell Constant: 10Β±2
Support Detection Range: 10~100ms/cm
Temperature Range: 0~40Β°C
Probe Life: >0.5 year (Actual life is related to frequency of use and scene)
Cable Length: 100Β±2cm
SHIPPING LIST
Electrical Conductivity ProbeοΌK=10, Laboratory GradeοΌ x1
Signal Conversion Board x1
Standard Buffer Solution 12.88ms/cm x4
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screw
https://wiki.dfrobot.com/Gravity_Analog_Electrical_Conductivity_Sensor_Meter_K=10_SKU_DFR0300-H
SKU : KB3002
CODE: DFR0300-H
FEATURES
3.0~5.0V wide voltage inputοΌ0~3.2V output voltage, which is compatible with 5V and 3.3V main board
AC excitation source, effectively reduce polarization
Gravity connector and BNC connector, plug and play, no welding
Software library supports single-point calibration, and automatically identifies standard buffer solution, integrates temperature compensation algorithm
Uniform size and connector , convenient for the design of mechanical structures
SPECIFICATION
Signal Conversion Board
Supply Voltage: 3.0~5.0V
Output Voltage: 0~3.2V
Probe Connector: BNC
Signal Connector: PH2.0-3Pin
Measurement Accuracy: Β±5% F.S.
Board size: 42mm*32mm/1.65in*1.26in
Electrical Conductivity Probe
Probe Type: Laboratory Grade
Cell Constant: 10Β±2
Support Detection Range: 10~100ms/cm
Temperature Range: 0~40Β°C
Probe Life: >0.5 year (Actual life is related to frequency of use and scene)
Cable Length: 100Β±2cm
SHIPPING LIST
Electrical Conductivity ProbeοΌK=10, Laboratory GradeοΌ x1
Signal Conversion Board x1
Standard Buffer Solution 12.88ms/cm x4
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screw
https://wiki.dfrobot.com/Gravity_Analog_Electrical_Conductivity_Sensor_Meter_K=10_SKU_DFR0300-H
Ada masalah dengan produk ini?