5.0/ 5.0
100% pembeli merasa puas
78 rating • 21 ulasan
5(77)98.72%
4(1)1.28%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: 44
Subtotal
Rp160.000
WS Stupid Stabilizer Clip In PCB Mount Stabs / Stabilizer Mechanical Keyboard - 1.2mm, Stabilizer
Rp160.000
Pilih ukuran: 1.2mm
Pilih warna: Stabilizer
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Stabilizer
WS Stupid Stabilizer !
Intro:
WS Stupid stabilzier ini adalah stabilizer PCB Mount dengan sistem clip in terbaru dari Wuque Studio. Stabilizer ini menggunakan sistem TPU Silicone pada bagian dalam stem dan bagian clip wire nya sehingga stabilizer ini TIDAK perlu lagi di retune dan hollee mod, cukup di lube sangat sedikit saja.
Saat ini hanya tersedia ukuran yang stem standard (bukan long pole)
TERDAPAT jasa lube untuk 1 set stabilizer. Jasa lube 62.500 untuk 1 set menggunakan krytox 205G0. Pembeli dapat menambahkan 1.2mm / 1.6mm Stabilizer dan Jasa Lube 1 Set jika ingin menggunakan jasa lubenya.
Features:
- Stem: PC
- Bottom Housing: Pom
- Clip-in design eliminates the need for screws.
- TPU silicone in housing is applied to the areas in contact with the wire to reduce friction
- These stabs start from the front end of the wire and the inside of the stabilizer stem respectively to avoid the noise caused by the collision or friction between the wire and the stabilizer stem, which - also greatly helps to improve the stability of the stabilizer.
- The housing design makes it impossible for wires to pop out since they're installed from the bottom.
- The stabs are pre-lubed to help things be easier, but we still suggest lubing them a bit before using them.
- Box packaging to prevent wires from being bent or unbalanced during transit.
The Stabilizer kit Includes:
- Stabilizer housings (x5 pairs)
- Stabilizer stems (x5 pairs)
- 2U wires (x4)
- 6.25u wire (x1)
- 7u wire (x1)
- clip-in inserts (x1 Set)
Specification:
- Stem: PC
- Bottom Housing: Pom
- TPU silicone in housing
- Package Size: 150.25*17.25*82.75mm.
- Package weight: 0.041kg
Intro:
WS Stupid stabilzier ini adalah stabilizer PCB Mount dengan sistem clip in terbaru dari Wuque Studio. Stabilizer ini menggunakan sistem TPU Silicone pada bagian dalam stem dan bagian clip wire nya sehingga stabilizer ini TIDAK perlu lagi di retune dan hollee mod, cukup di lube sangat sedikit saja.
Saat ini hanya tersedia ukuran yang stem standard (bukan long pole)
TERDAPAT jasa lube untuk 1 set stabilizer. Jasa lube 62.500 untuk 1 set menggunakan krytox 205G0. Pembeli dapat menambahkan 1.2mm / 1.6mm Stabilizer dan Jasa Lube 1 Set jika ingin menggunakan jasa lubenya.
Features:
- Stem: PC
- Bottom Housing: Pom
- Clip-in design eliminates the need for screws.
- TPU silicone in housing is applied to the areas in contact with the wire to reduce friction
- These stabs start from the front end of the wire and the inside of the stabilizer stem respectively to avoid the noise caused by the collision or friction between the wire and the stabilizer stem, which - also greatly helps to improve the stability of the stabilizer.
- The housing design makes it impossible for wires to pop out since they're installed from the bottom.
- The stabs are pre-lubed to help things be easier, but we still suggest lubing them a bit before using them.
- Box packaging to prevent wires from being bent or unbalanced during transit.
The Stabilizer kit Includes:
- Stabilizer housings (x5 pairs)
- Stabilizer stems (x5 pairs)
- 2U wires (x4)
- 6.25u wire (x1)
- 7u wire (x1)
- clip-in inserts (x1 Set)
Specification:
- Stem: PC
- Bottom Housing: Pom
- TPU silicone in housing
- Package Size: 150.25*17.25*82.75mm.
- Package weight: 0.041kg
Ada masalah dengan produk ini?