Mechanical heating temperature controller M5 floor knob electric heating temperature controller 16A

SELAMAT DATANG DI TOKO KAMI Usage : indoor Brand Name : feimiaomilei Origin : Mainland China Certification : CE International Standard Electronics: 1. Warm installation on the surface of indoor walls 2. Temperature control range+5/+40 3. Applied to the vehicle control system 4. Heating is in progress when illuminated. 5. Can meet the needs of safety, energy conservation, and comfort. Technical parameters: Voltage: 220VAC/230VAC 50/60Hz Power consumption: 5VA Temperature control range: 5 ~40 Temperature limit range: 25 ~55 Energy saving temperature: 5 Temperature switch deviation: 0.5K Environmental temperature: -5 ~50 Housing protection: IP20 External sensor: lead length is 3 meters Shell material: flame-retardant PC Suggested installation location selection diagram: External temperature sensor and resistance value: Temperature() Resistance() 5 22070 10 17960 20 12091 30 8312 40 5827 Installation of floor (external) temperature sensor: Please place the sensor inside the installation sleeve, bury the sleeve under the floor, thicken the end and try to place it on the upper part of the mixed soil layer. The sensor cable can be extended to 50 meters using other cables. Temperature calibration: When the indoor temperature reaches a stable state, users can calibrate the heating thermostat to make the temperature reading consistent with the actual room temperature Calibration operation procedures: a) Measure temperature with a thermometer; b) Remove the control knob; Rotate the adjustment lever; c) (as shown in the figure) until the LED turns off; d) Install the control knob so that the temperature reading is the same as the actual temperature. Please do not rotate the button as the factory default values have been calibrated! Sebelum membeli suatu produk, Mohon dapat membaca deskripsi produk dengan cermat Harap tanyakan stok sebelum melakukan pemesanan ya kak Jika Anda memiliki pertanyaan, silakan hubungi kami.