Atur jumlah dan catatan
Stok Total: Sisa 3
Subtotal
Rp14.800.000
AUDIOLAB 8200X7 7-Channel Power Amplifier
Rp14.800.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Amplifier
The Audiolab 8200X7 shares the same superb audio quality as it's 8200 series stereo brothers but with multi-channel surround sound for those who are seeking the very best of both movie and high fidelity music worlds. It acts as the perfect partner to the 8200AP and provides 7 channels of audio or 5/6 channels with flexible bridging modes.
A smart feature of the meaty 8200X7 is its power-saving mode. The 8200X7 detects an audio signal from either a pre-press switching signal or by using a two-stage adjustable sensitivity sensor that powers on when audio is passed through via the processor and goes to sleep a few minutes after it is silent.
You can use the 8200X7 with switch settings that facilitate "bridging" of two channels. Three power output configurations available are:
- 7x100W RMS
- 5x100W + 1x150W RMS
- 3x100W + 2x150W RMS
Audiolab 8200X7 Features
Tick Aluminum panel construction
Tick 12 volt trigger standby
Tick High current to drive difficult loads
Specification
Rated Output Power 7 x 100W (8ohm)
or 5 x 100W and 1 x 150W (8ohm)
or 3 x 100W and 2 x 150W (8ohm)
Frequency Response Gain 1.5Hz - 150kHz (-3dB) 28.8dB
Total Harmonic Distortion N/A
Signal-to-Noise Ratio > 90dB
Input Sensitivity 1.05V RMS
Impedance 47kohm
Dimensions (W x H x D) 448 x 132 x 340mm
Net Weight 18.2kg
A smart feature of the meaty 8200X7 is its power-saving mode. The 8200X7 detects an audio signal from either a pre-press switching signal or by using a two-stage adjustable sensitivity sensor that powers on when audio is passed through via the processor and goes to sleep a few minutes after it is silent.
You can use the 8200X7 with switch settings that facilitate "bridging" of two channels. Three power output configurations available are:
- 7x100W RMS
- 5x100W + 1x150W RMS
- 3x100W + 2x150W RMS
Audiolab 8200X7 Features
Tick Aluminum panel construction
Tick 12 volt trigger standby
Tick High current to drive difficult loads
Specification
Rated Output Power 7 x 100W (8ohm)
or 5 x 100W and 1 x 150W (8ohm)
or 3 x 100W and 2 x 150W (8ohm)
Frequency Response Gain 1.5Hz - 150kHz (-3dB) 28.8dB
Total Harmonic Distortion N/A
Signal-to-Noise Ratio > 90dB
Input Sensitivity 1.05V RMS
Impedance 47kohm
Dimensions (W x H x D) 448 x 132 x 340mm
Net Weight 18.2kg
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan