Kidde Fire Suppression Abort Switch

Model 878752
Suppression System Abort Station
FEATURES
• UL Listed
• Flush or Surface Mount
• One Normally Open Contact
• Sized for Double Gang Box
• Large Yellow Push Button Switch
• Abort Station Becomes Addressable SLC Device with
installation of one (1) Model AI Addressable Monitor
Module, N.O.
DESCRIPTION
The Kidde Model 878752 Abort Station features a large,
easy-to-operate abort push button. The momentary type
switch is very easy to see due to its highly visible yellow
color. The abort station stainless steel faceplate is clearly
labeled with operation procedures—eliminating indeci-
sion and hesitation.
The Backbox is painted with red enamel and is provided
with four 1/2-inch knockouts. The pre-drilled and tapped
mounting tabs allow for easy attachment of the abort
station.
To make the Abort Station an addressable SLC device for
use with Kidde Intelligent control units, one SmartOne
Model AI monitor module (purchased separately) must
be installed into the backbox. The Model AI monitor mod-
ule is seated inside a bracket (included) and easily
installs with two mounting screws.
A cULus-listed Abort Station for Canadian applications
that require compliance to ULC S527-11 (3rd edition) is
also available (blue faceplate with white raised lettering).
Order P/N 84-878752-110.
TECHNICAL SPECIFICATIONS
Electrical Ratings: One normally open momentary
contact, rated 2.5 Amps @ 120 Vdc
Ambient
Temperature: -13°F to 158°F (-25°C to 70°C)
Terminals: Captive screws and saddle clamps
accept 14 AWG to 24 AWG wire
Mounting: Four 6-32 x 1/2-inch mounting
screws included