UNDERGROUND METAL GOLD DETECTOR ALAT PENDETEKSI LOGAM EMAS BAWAH TANAH

Pastikan membaca sebelum membeli: Battery: 6 AA batteries (not including battery)

2. Current: minimum ~ 30mA maximum ~ 60mA

3. Working voltage: 7.1 ~ 9.6v

4. Signal frequency: 7.5KHz +/- 1KHz

5. Working environment: -20 ~ 60

6. Dimensions: (mm) 550 (length) 205 (width) 130 (high)

7. Gross weight: 3kg

8. Net weight: 1.37kg

Indoor use

* Open the detector, then the detector should be in normal working condition.

* Place the detector on the table, remove the metal objects you wear, such as: watch rings and so on.

* Adjust the probe plate so that the detection surface faces the ceiling.

* Keep the probe at 2-3 inches above the probe plate and slowly sweep the probe.





Outdoor trial

* Open the detector, then the detector should be in normal working condition.

* Find a ground outside the metal without metal objects.

* Bury the target in the ground, the distance between the target should be 1-2 feet.

* Keep the probe disc at a distance of 1 to 2 inches and move the detector slowly at the detection target burial.

* When the target is detected, the detector will sound the image on the LCD screen to start flashing.

* Slowly lift the probe, the depth icon on the LCD screen rises.

* If the rectangular aperture jumps from one target pattern to another or vice versa when detecting the target, the detected target may not be on the display or the detection terimakasih telah berbelanja DITOKO KAMI :)