HOT SALE PERMATEX ULTRA GREY RIGID HIGH-TORQUE RTV SILICONE GASKET MAKER NU9

Permatex Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker Automobile Heavy Duty Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges DIRECTIONS: 1. For best results, clean and dry all surfaces with a residue-free solvent such as Permatex #34; Brake amp; Parts Cleaner. 2. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16 #39; #39; #34; to 1/4 #39; #39; #34; (2 to 6 mm) bead. 3. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn. 4. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions. Clean uncured silicone from hands, tools and clothing with Permatex #34; Fast Orange #34; Wipes or Fast Orange #34; Hand Cleaner. Setelah KLIK BELI kami anggap sudah memahami dan mengerti apa yang telah kami jelaskan di atas, KLIK BELI = SETUJU.