Best! Modul Hochiki DCP-SOM-A Class A Supervised Output Module (Manual)

Happy Shopping!! DESCRIPTION The Class A Supervised Output Modules (DCP-SOM-A amp; SOM-AI) have been designed to provide application flexibility and quick response to emergency conditions. Flexibility is provided by a wide range of operating modes, including supporting multi-zone operations, and/ or functions, up to 16 different modulation patterns and multi-state programming. The operating parameters for the DCP-SOM-A amp; -AI are maintained by the moduleand do not require individual communication with the control system during emergency conditions to operate. SPECIFICATIONS -Supply Voltage (S-SC) : 25.3 ~ 39 VDC -Auxiliary Supply Voltage : 24 VDC -Average Current Consumption -SOM-AI - 420μA (Typical), SOM-A - 220μA (Typical) -(on S-SC Line) Maximum 6mA: Red Alarm LED On -Current Consumption on Auxiliary Power Lines : Typical 50μA -SCI On Resistance 40m ohm Max. (Normal Condition) -SCI Fault Detection Threshold : 12 volts (Typical) -SCI Isolation Current (Short Circuit Condition) : 10mA (Typical) -Maximum Quantity Per Loop : 127 -Dimensions (107x119x36)mm : 4.2 #34;W x 4.7 #34;H x 1.4 #34;D -Ambient Temperature : 32°F (0°C) ~ 120°F (49°C) -Mounting : 4 #34; square electrical box -Maximum Output Current : 2A@24VDC power limited -Relative Humidity : 90% RH Non-condensing STANDARD FEATURES -Built-in SCI circuitry (SOM-AI only) -Flexible application -Quick response to emergency conditions -Operation parameters are maintained by the module, and individual communication with the control system during emergency conditionsis not required -Contacts are rated 2.0 Amps @ 24VDC -Programming is highly flexible providing 16 priority states plus zoning capability -Programmed device output is turned off, silenced, or programmed to output the selected pattern -UL 864 Listed