4.6/ 5.0
90% pembeli merasa puas
10 rating • 3 ulasan
5(9)90%
4(0)0%
3(0)0%
2(0)0%
1(1)10%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp888.000
INDOCART H2 Direct Extruder Kit 3D Printer Biqu Dual Drive Gear
Rp888.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 3D Biqu - Spare Part
INDOCART H2 Direct Extruder Kit 3D Printer Biqu Dual Drive Gear
Kode Produk:
V-F-DIREXT-BIQU-H2
Bisa digunakan pada type:
Biqu BX
Biqu B1
Artillery Sidewinder X1
Ender 3,3 Pro, 3 V2
Ender 5
Ender 6
CR-10 S Pro
CR-10 V2/V3
CR-6
Specification
Extrusion type: dual drive gear extrusion
Printing temperature: 200-260C (upgradable to 500C)
Weight: 211g (including aluminum heater block and fan)
Max pushing force: 7.5kg (dependent on the filament)
Flow rate (based on the current): 600mm3 /min (dependent on the filament)
Nominal steps per mm(16x): 932 steps per mm (further calibration required)
Recommended motor current: 800mA
Filament diameter and tolerances: 1.75 +/-0.05mm
Not compatible with Nema14 but based on its design*
Pastikan anda mendapatkan kualitas terbaik hanya di IndoCart.
Kode Produk:
V-F-DIREXT-BIQU-H2
Bisa digunakan pada type:
Biqu BX
Biqu B1
Artillery Sidewinder X1
Ender 3,3 Pro, 3 V2
Ender 5
Ender 6
CR-10 S Pro
CR-10 V2/V3
CR-6
Specification
Extrusion type: dual drive gear extrusion
Printing temperature: 200-260C (upgradable to 500C)
Weight: 211g (including aluminum heater block and fan)
Max pushing force: 7.5kg (dependent on the filament)
Flow rate (based on the current): 600mm3 /min (dependent on the filament)
Nominal steps per mm(16x): 932 steps per mm (further calibration required)
Recommended motor current: 800mA
Filament diameter and tolerances: 1.75 +/-0.05mm
Not compatible with Nema14 but based on its design*
Pastikan anda mendapatkan kualitas terbaik hanya di IndoCart.
Ada masalah dengan produk ini?