5.0/ 5.0
100% pembeli merasa puas
10 rating • 2 ulasan
5(10)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: 21
Subtotal
Rp20.000
TTL to RS485 Converter 485 to Serial UART USART Automatic Flow Control - 74HC04D
Rp20.000
Pilih ukuran: 74HC04D
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
IC Model CD74HC04D
Highlights:
(1) Compatible with 3.3V and 5.0V power supply.
(2) Compatible with 3.3V and 5.0V signal.
(3) Absolute using imported chips; industrial design; anti-interference ability; while using more effective 485 lightning protection design can be used in the industrial field and harsh field environments; the working temperature of -40 to + 85 Degree Celsius ;transmission distance up to 1 kilometer (made with 850 meters of cable F1.5 tests recommended using in the 800 meters,when more than 800m please add repeaters).
(4) Semi-hole process design, thickness 0.8mm, can easily use as a picture board, it can also be welded terminal use.
(5) Has RXD, TXD signal indicator lights, monitor send and receive status.
Features:
(1) The module is fully considered lightning protection design,when long-distance transmission in the wild, the module "Connected to the ground" terminal is connected to the ground, can play a very good jamming and anti-lightning effect,so more secure; it can not connect with the ground when the indoor short-distance transmission.
(2) Using the standard 2.54 pitch design, easy to secondary development.
(3) Has a 120 ohm termination resistors, shorted R0 to enable the matching resistor.
(4) Support multi-machine communication, allowing access at up to 128 devices on the bus
(5) The module can be hot swapped, the signal does not appear dead phenomenon.
(6) A large area of copper to prevent signal interference.
Highlights:
(1) Compatible with 3.3V and 5.0V power supply.
(2) Compatible with 3.3V and 5.0V signal.
(3) Absolute using imported chips; industrial design; anti-interference ability; while using more effective 485 lightning protection design can be used in the industrial field and harsh field environments; the working temperature of -40 to + 85 Degree Celsius ;transmission distance up to 1 kilometer (made with 850 meters of cable F1.5 tests recommended using in the 800 meters,when more than 800m please add repeaters).
(4) Semi-hole process design, thickness 0.8mm, can easily use as a picture board, it can also be welded terminal use.
(5) Has RXD, TXD signal indicator lights, monitor send and receive status.
Features:
(1) The module is fully considered lightning protection design,when long-distance transmission in the wild, the module "Connected to the ground" terminal is connected to the ground, can play a very good jamming and anti-lightning effect,so more secure; it can not connect with the ground when the indoor short-distance transmission.
(2) Using the standard 2.54 pitch design, easy to secondary development.
(3) Has a 120 ohm termination resistors, shorted R0 to enable the matching resistor.
(4) Support multi-machine communication, allowing access at up to 128 devices on the bus
(5) The module can be hot swapped, the signal does not appear dead phenomenon.
(6) A large area of copper to prevent signal interference.
Ada masalah dengan produk ini?