5.0/ 5.0
100% pembeli merasa puas
4 rating • 2 ulasan
5(4)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp65.500
Brushed ESC 20A RC Car RC Boat
Rp65.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: RC Car
Features and Functions:
1. Connect the power supply and motor, insert receiving hine, and then there will arise a sound of "DO" which means the ESC has been powered on.
2. If in the center position, the motor immediately sent DO BE MI.
If the level is not in the center, the motor will come up a sound of DO, DO.
To prompt the user, until the user mediate to center position, DO would stop and immediately issued DO BE MI.
Center of a learning finished and start working.
3. The state of the LED, the remote control is in a central location, the LED turn on or off, if go on or ba, LED light would be full on, LED fliers when no signal state.
Specifications:
Operating voltage: 3.0 V - 9.4 V
The input signal types: PPM
Driving frequency: 2 KHZ
Item Output current
Continuous 20A
30 seconds 25A
5 seconds 50A
Instantaneous current 80A
Weight: 11 g (including wire and plug)
Size: 30 X 23 X 5 mm/1.18"X0.98"X0.2" (length X width X thiness)
Remarks: (Line on the JST) the red is positive, bla is the cathode
1 X 3 p line bla (cathode), red (the anode).The white line (Signal)
1. Connect the power supply and motor, insert receiving hine, and then there will arise a sound of "DO" which means the ESC has been powered on.
2. If in the center position, the motor immediately sent DO BE MI.
If the level is not in the center, the motor will come up a sound of DO, DO.
To prompt the user, until the user mediate to center position, DO would stop and immediately issued DO BE MI.
Center of a learning finished and start working.
3. The state of the LED, the remote control is in a central location, the LED turn on or off, if go on or ba, LED light would be full on, LED fliers when no signal state.
Specifications:
Operating voltage: 3.0 V - 9.4 V
The input signal types: PPM
Driving frequency: 2 KHZ
Item Output current
Continuous 20A
30 seconds 25A
5 seconds 50A
Instantaneous current 80A
Weight: 11 g (including wire and plug)
Size: 30 X 23 X 5 mm/1.18"X0.98"X0.2" (length X width X thiness)
Remarks: (Line on the JST) the red is positive, bla is the cathode
1 X 3 p line bla (cathode), red (the anode).The white line (Signal)
Ada masalah dengan produk ini?