5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Sisa 10
Subtotal
Rp5.499.000
Skywalker X8 Flying Wing 2120mm FPV/UAV Airplane Kit - Hitam
Rp5.499.000
Pilih warna: Hitam
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: FPV / UAV Airplane
*ready warna hitam!!!
This is the X-8 FPV wing from Skywalker Technology,.
The BIG FPVwing!
The X-8 has been specifically designed for FPV and UAV, customised for F-Tek stabiliser systems.
An awesome looking and fantastic flying FPV / UAV platform, moulded out of EPO so it's nearly indestructible!
This model offers a huge amount of under canopy space, excellent glide performance, fast low power cruise speeds in the region of 80-90 kph.
The airframe was designed from the outset to take FPV and other video devices, the equipment bays have been laid out to suit FPV / UAV applications, there is a camera mount in the nose and there's a forward oblique mount to suit a Gopro. Transporting the airframe is easy, both the wing panels and the vertical stabs are bolt on affairs.
Nice design points are the moulded in wing reflex, removable vertical stabilisers, ventral launching grips, nose camera bay, canopy retained via strong magnets , moulded battery and FPV trays and 2 through fuselage spars - plus a moulded in spar in each wing panel.
It's an impressive airframe that spans 2120mm and has a rather imposing silhouette!
Specifications:
Wingspan: 2120mm
Motor: 400 - 800watts dependant on payload
Prop: 12x6 - 13x8
Battery: 4s 3000mah - 6S 5000 mah
Esc: 40-70 amp
Maximum AUW: 3500g
Required:
6Channels Radio System
Hitec HS-225BB servos x2
Revox Pro 13x6.5E Propeller
T-Motor AT3520-5 KV880 Brushless Motor
T-Motor 80A Brushless ESC
4S 5500mAh x2 Lipo battery
FPV or UAV System
This is the X-8 FPV wing from Skywalker Technology,.
The BIG FPVwing!
The X-8 has been specifically designed for FPV and UAV, customised for F-Tek stabiliser systems.
An awesome looking and fantastic flying FPV / UAV platform, moulded out of EPO so it's nearly indestructible!
This model offers a huge amount of under canopy space, excellent glide performance, fast low power cruise speeds in the region of 80-90 kph.
The airframe was designed from the outset to take FPV and other video devices, the equipment bays have been laid out to suit FPV / UAV applications, there is a camera mount in the nose and there's a forward oblique mount to suit a Gopro. Transporting the airframe is easy, both the wing panels and the vertical stabs are bolt on affairs.
Nice design points are the moulded in wing reflex, removable vertical stabilisers, ventral launching grips, nose camera bay, canopy retained via strong magnets , moulded battery and FPV trays and 2 through fuselage spars - plus a moulded in spar in each wing panel.
It's an impressive airframe that spans 2120mm and has a rather imposing silhouette!
Specifications:
Wingspan: 2120mm
Motor: 400 - 800watts dependant on payload
Prop: 12x6 - 13x8
Battery: 4s 3000mah - 6S 5000 mah
Esc: 40-70 amp
Maximum AUW: 3500g
Required:
6Channels Radio System
Hitec HS-225BB servos x2
Revox Pro 13x6.5E Propeller
T-Motor AT3520-5 KV880 Brushless Motor
T-Motor 80A Brushless ESC
4S 5500mAh x2 Lipo battery
FPV or UAV System
Ada masalah dengan produk ini?