Toa System Management Amplifier VM-2240 (240watt) VM 2240

The VM-2240 is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with 4 audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-zone selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions(*1) in the emergency situation. Broadcast can be made from an optional RM-200M Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, for 100 V/42 application the unit features the surveillance function(*2) which automatically checks the system for failures. (*1) An optional EV-200M Voice Announcement Board is required. (*2) An optional SV-200MA Surveillance Board is required.

Power Source AC: 230 V
DC: 24 V/15 A
Applicable cable diameter: AWG22 - AWG14
Power Consumption on AC Mains With no signal present: 54 W
Under normal operating conditions according to
EN60065: 1998 sec. 4.2: 255 W
With rated output signal: 549 W
Current Consumption on 24 V DC Power Input With no signal present: 1 A
Under normal operating conditions according to
EN60065: 1998 sec. 4.2: 5 A
With rated output signal: 14 A
Rated Output 240 W
Output Voltage /Impedance 100 V/42
(selectable by the internal wiring change)
Frequency Response 50 Hz - 16 kHz
Distortion 1 % or less
Signal-to-Noise Ratio 60 dB or more

Finish Panel: ABS resin
Case: Steel plate
Dimensions 419 (W) 143.3 (H) 355.7 (D) mm (16.5 5.64" 14)
Weight 14.5 kg (31.97 lb)
Accessory Power cable (2 m (6.56 ft)) 1
Miniature type time-lag fuse T3.15 A 1
Option Rack mounting bracket: MB-36
Input transformer: IT-450
Voice announcement board: EV-200M
Surveillance board: SV-200MA