Atur jumlah dan catatan
Stok Total: 35
Subtotal
Rp250.000
WS2815 RGB LED Pixels Strip Tape (WS2812B/WS2813) Light Individually Addressable Dual-Signal 1m/5m 30/60/144 Pixels/Leds/m DC12V
Rp250.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Brand Name : SEZO
Model Number : WS2815-RGB-12V
Power Source : DC
Voltage : 12V
Certification : CCC,ROHS,ce
Origin : Mainland China
Occasion : Garden
Waterproof : Yes
Item Type : Strip
Average Life (hrs) : 50000
Color Temp(K) : -
Luminous Flux : <60
LED Chip Model : SMD5050
LED Chip Brand : Epistar
LEDs Number/M : 30leds/60leds/144leds
Specifications (light beads / m) : 30leds/60leds/144leds
Power Consumption (W/m) : 9/18/43.2 W/M
Strip type : SMD
Hign-concerned Chemical : None
Wide compatibility:
Can be controlled by Arduino, Raspberry Pi, Fadecandy, K1000C, SP105E, SP107E, SP110E etc.
12V WS2812B LED Strip:
WS2815 LED strip is upgraded version of 5V WS2812B LED strip. For 5M LED strip, even if all the LEDs are turned on full white, 12V version has no voltage drop. You don't need to inject power as frequently as 5V version.
Individually addressable:
Each pixel can have its own color and brightness. You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display.
Dual-signal wires:
WS2815 LED strip is Similar like the version of 5V WS2813 LED strip, Designed with one data wire and one backup data wire. Signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work.
Easy installation:
Self-adhesive tape on back FOR IP30/IP65, it can be fixed on any dry and flat surface without any screws and clips. Each LED can be cut off at cutting line.
There are 4-pin JST SM connectors and separated power/ground wires on both ends, which make it easy to hook up each other and wire up for power.
Specifications:
IC type :WS2815 IC
Gray level: 256
View angle: 120
Input voltage: DC12V
Color: full color 24-bit
FPCB board color: White/Black
Power: 0.3W/LED 30/60/144 LEDs/m
Model: WS2815 strip 5050rgb chips
Storage Temperature:-30-+95 C
Operating Temperature:-20 ~ +85C
Led Qty: 30/60/144pcs RGB SMD 5050 per meter
The distance between two LEDs:30Leds/m -- 28mm, 60Leds/m -- 12mm, 144Leds/m -- 1.92mm
Wave length(nm):Red,650nm ; Green,520nm ; Blue,460nm
Waterproof level: IP30: Non- waterproof, IP65: Waterproof in Silicon Coating, IP67: Waterproof in SiliconTube
Package includes:
1 x 1M/5M RGB 30/60/144leds/m led strip
1 x 4pin connector
Note:
Power adapter and controller are not included!
It is forbidden to light up for a long time when the strip is in the spool.
The different between the WS2815 and WS2815 ECO.
1,LED Chip Material:
11 pcs Pure Gold Line, Copper Bracket (WS2815).
10 pcs Admixture Gold Line, Copper Bracket (WS2815ECO).
2, LED IV Value Brightness:
Red: 300-600mcd, Green: 1500-2500mcd, Blue: 150-400mcd (WS2815).
Red: 200-350mcd, Green: 1100-1400mcd, Blue: 150-300mcd (WS2815ECO).
3, Warranty Period of Led Strip:
36 Months (WS2815), 18 Months (WS2815ECO).
4, LED Channel Order:
GRB (WS2815), RGB (WS2815ECO).
Model Number : WS2815-RGB-12V
Power Source : DC
Voltage : 12V
Certification : CCC,ROHS,ce
Origin : Mainland China
Occasion : Garden
Waterproof : Yes
Item Type : Strip
Average Life (hrs) : 50000
Color Temp(K) : -
Luminous Flux : <60
LED Chip Model : SMD5050
LED Chip Brand : Epistar
LEDs Number/M : 30leds/60leds/144leds
Specifications (light beads / m) : 30leds/60leds/144leds
Power Consumption (W/m) : 9/18/43.2 W/M
Strip type : SMD
Hign-concerned Chemical : None
Wide compatibility:
Can be controlled by Arduino, Raspberry Pi, Fadecandy, K1000C, SP105E, SP107E, SP110E etc.
12V WS2812B LED Strip:
WS2815 LED strip is upgraded version of 5V WS2812B LED strip. For 5M LED strip, even if all the LEDs are turned on full white, 12V version has no voltage drop. You don't need to inject power as frequently as 5V version.
Individually addressable:
Each pixel can have its own color and brightness. You can control it individually and set them to any color or animation you want. 256 brightness display and 24-bit color display.
Dual-signal wires:
WS2815 LED strip is Similar like the version of 5V WS2813 LED strip, Designed with one data wire and one backup data wire. Signal break-point continuous transmission. If one LED is damaged, the following LEDs can still work.
Easy installation:
Self-adhesive tape on back FOR IP30/IP65, it can be fixed on any dry and flat surface without any screws and clips. Each LED can be cut off at cutting line.
There are 4-pin JST SM connectors and separated power/ground wires on both ends, which make it easy to hook up each other and wire up for power.
Specifications:
IC type :WS2815 IC
Gray level: 256
View angle: 120
Input voltage: DC12V
Color: full color 24-bit
FPCB board color: White/Black
Power: 0.3W/LED 30/60/144 LEDs/m
Model: WS2815 strip 5050rgb chips
Storage Temperature:-30-+95 C
Operating Temperature:-20 ~ +85C
Led Qty: 30/60/144pcs RGB SMD 5050 per meter
The distance between two LEDs:30Leds/m -- 28mm, 60Leds/m -- 12mm, 144Leds/m -- 1.92mm
Wave length(nm):Red,650nm ; Green,520nm ; Blue,460nm
Waterproof level: IP30: Non- waterproof, IP65: Waterproof in Silicon Coating, IP67: Waterproof in SiliconTube
Package includes:
1 x 1M/5M RGB 30/60/144leds/m led strip
1 x 4pin connector
Note:
Power adapter and controller are not included!
It is forbidden to light up for a long time when the strip is in the spool.
The different between the WS2815 and WS2815 ECO.
1,LED Chip Material:
11 pcs Pure Gold Line, Copper Bracket (WS2815).
10 pcs Admixture Gold Line, Copper Bracket (WS2815ECO).
2, LED IV Value Brightness:
Red: 300-600mcd, Green: 1500-2500mcd, Blue: 150-400mcd (WS2815).
Red: 200-350mcd, Green: 1100-1400mcd, Blue: 150-300mcd (WS2815ECO).
3, Warranty Period of Led Strip:
36 Months (WS2815), 18 Months (WS2815ECO).
4, LED Channel Order:
GRB (WS2815), RGB (WS2815ECO).
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan