READY MAMBA MK4 F722 MINI F40 128K Flight Controller Stack

Diatone’s Mamba MK4 (fourth generation) stack is a redesign of its already fantastic line of flight controllers and ESCs. Improvements include making the products easier to use by increasing soldering pad sizes by 30%, pad spacing by 100%, , and more. A completely different pad style has been redesigned to increase pad area by 30% and pad spacing by 100%, reducing solder errors and associated failures. 1. The pad area increased by 30% 2. Pad spacing increased by 100% 3. MP9943 synchronous rectifier BEC 4. MINI series upgrade DJI interface and 5v 15W/9V 18W 2 set BEC 5. The whole series use USB Type-C 6. The whole series support 6 Set UART and I2C 7. A full range of integrated Flash and Baro 7. 4 Set Power Protection 8. 32Bit ESC all support 128K 9. Mini series FC uses 2mm and 3mm mounting holes, special dampening ring 10. Upgrade the twisted pair anti-jamming cable and reinforcement process Specifications: F722 MINI MK4 FLIGHT CONTROLLER - MCU: STM32F722 - Frequency: 216MHz - Gyro: Gyro ICM42688P - Barometer: SPL06 - OSD: AT 7456E - Blackbox: 16M Memory - Barometer: Yes - UARTS: 6 Sets - I2C: Yes - F.Port: Yes - Buzzer: Yes - Current: Yes - ESC Signal: 8 Sets - BEC 3.3V: 0.5A - BEC 5V: 2.5A - BEC 9V: 2A - MB LED: Yes - BF LED: Yes - Air Unit Port: Yes - VTX Switch: Yes - BEC Protection: Yes - Receiver Protection: Yes - TVS Protection: Yes - Input: 6S LiPo - Firmware: Betaflight - Mounting: 20.0×20.0mm,M3/M2 - Size: 29.0×29.5×6.5mm - Weight: 6.0g F40_128K MINI 4-IN-1 ESC - Input Voltage: 6S LiPo (25.2V) - CURR : Yes - Output Current : 40A - Peak Current : 45A - BLHeli : BLHeli 32 - Target: MAMBA F40_128K MINI - Protocol : DShot300/600/1200 - PWM: 24~128K - Mounting Size: 20x20mm, M2 - Dimensions: 31.0×31.0x6.5mm - Weight : 6.5 gr