Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp1.468.000
Small Bending Machine Manual Iron Steel Wire Stainless Steel Rod Bender Folding Machine Small Tools
Rp1.468.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Performance introduction
This folding machine is a new model that is very compact, convenient, practical, strong and cheap. It is suitable for all kinds of thin plate parts, and can bend the workpieces into various angles and forms. It is equivalent to the performance of large-scale folding machines that cost tens of thousands, and it also has the convenience that large-scale folding machines cannot match. It is flexible and not restricted by the site. A small number of sporadic workpieces can be completed without fixing. For mass production, it is recommended to use screws to fix them on the workbench, which can improve quality and work efficiency. It is an ideal helper and tool for small businesses, individual processing industries, and household use.
Features: 1. The middle strengthening rod is used to ensure that the workpiece is evenly stressed and there will be no bevel phenomenon. (On the market, there is one end with force and the other with passive force. It is easy to find that the angle of one end is in place, but the other end is not completely in place) 2. It can fold angles less than 90°, (60-180°), which is extremely practical. It is slightly better than similar small folding machines on the market.
Technical Parameters
Bending width: 0-110mm. Note: Actual up to 115mm
Bending thickness: 0-2.mm. Note: Narrow workpiece, 2.5mm
Bending angle: 60-90-180°
Minimum bending height: about 8mm. Note: Thinner and narrower parts: about 5mm
Scope of application
Copper plate, iron plate, aluminum plate, galvanized plate, stainless steel plate, etc.
Use suggestions
1. The gap can be adjusted from 0 to 3mm (add a washer under the pressure plate) according to the thickness of the workpiece you need. For example, if the commonly used one is 0.1-1.0, you can adjust the gap to 1.0. Anything below 1.0 does not need to be adjusted. If the commonly used one is between 1.0-2.0, adjust it to 2.0. If it is between 1.0 and 2.0, there is no need to bother, and so on. Just make it
This folding machine is a new model that is very compact, convenient, practical, strong and cheap. It is suitable for all kinds of thin plate parts, and can bend the workpieces into various angles and forms. It is equivalent to the performance of large-scale folding machines that cost tens of thousands, and it also has the convenience that large-scale folding machines cannot match. It is flexible and not restricted by the site. A small number of sporadic workpieces can be completed without fixing. For mass production, it is recommended to use screws to fix them on the workbench, which can improve quality and work efficiency. It is an ideal helper and tool for small businesses, individual processing industries, and household use.
Features: 1. The middle strengthening rod is used to ensure that the workpiece is evenly stressed and there will be no bevel phenomenon. (On the market, there is one end with force and the other with passive force. It is easy to find that the angle of one end is in place, but the other end is not completely in place) 2. It can fold angles less than 90°, (60-180°), which is extremely practical. It is slightly better than similar small folding machines on the market.
Technical Parameters
Bending width: 0-110mm. Note: Actual up to 115mm
Bending thickness: 0-2.mm. Note: Narrow workpiece, 2.5mm
Bending angle: 60-90-180°
Minimum bending height: about 8mm. Note: Thinner and narrower parts: about 5mm
Scope of application
Copper plate, iron plate, aluminum plate, galvanized plate, stainless steel plate, etc.
Use suggestions
1. The gap can be adjusted from 0 to 3mm (add a washer under the pressure plate) according to the thickness of the workpiece you need. For example, if the commonly used one is 0.1-1.0, you can adjust the gap to 1.0. Anything below 1.0 does not need to be adjusted. If the commonly used one is between 1.0-2.0, adjust it to 2.0. If it is between 1.0 and 2.0, there is no need to bother, and so on. Just make it
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan