Tempat Alat Bubut Baja Pisau Knurling Reticulated Kompor + 2 Buah Roda Timbul Lubang Dalam 0.3Mm-2.0Mm Opsional

Reticulated Knurling Knife Steel Lathe Tool Holder Hob +2pcs Inner Hole Embossing Wheel 0.3mm-2.0mm Optional

Tempat Alat Bubut Baja Pisau Knurling Reticulated Kompor + 2 Buah Roda Timbul Lubang Dalam 0.3Mm-2.0Mm Opsional

Deskripsi :

Origin : Mainland China
Certification : CE
Degree : R0.1
Type : End Mill
Material : Carbide
Origin : Mainland China
Certification : CE


modname=ckeditor
1. Processing operation

The knurling force on the lathe is quite large, the workpiece must be firmly clamped knurling knife installation tool face should be perpendicular to the workpiece, while the knurling wheel center should be aligned with the axis of the workpiece. Knurled at the beginning of the head is very important to press directly into the workpiece can not stop, so that the workpiece is pressed out of the pattern. After the workpiece is rolled very clear and then drive away the knife to walk, otherwise it is easy to produce broken head, that is, pattern rolling. In knurling to ensure that there is sufficient lubrication, but also often remove iron filings after processing molding pattern will be clear and beautiful

2. Precautions

Only processing straight and convex mesh pattern
The tool can only be used on the cylindrical workpiece axial cutting tool needs precise setting and adjustment, otherwise the better effect can not be achieved

3 Processing materials

The hardness of knurled wheel is in the range of 59-62, and it can process materials with a hardness of 25 degrees, such as :45 # steel, iron, aluminum alloy, copper and other materials

Happy Shopping, Thank.