ZB2L3 V3 18650 Battery Capacity Tester External Load 1.2-12V Tester

ZB2L3 V3 18650 Battery Capacity Tester External Load 1.2-12V Tester 3A With Shell Welcome To My Shop : Budayakan Membaca Sebelum Membeli Barang Yang Anda Lihat Ini Barang PO (Pre-Order) Produk Import (Luar Negri) Pengiriman Super Cepat, Kebanyakan Barang Yang Kami Kirimkan 7-12 Hari Sudah Sampai Packing Aman dan Secure Produk Original Langsung Diorder, Stock Import Selalu Kami Update Happy Shopping ! Basic parameters: Power supply voltage: DC4.5-6V (micro USB interface) Working current: no more than 70mA Discharge voltage: 1.00V-15.00V resolution 0.01V Termination voltage range: 0.5-13.0V Support current: no more than 3.000A resolution 0.001A Voltage measurement error: less than 1% + 0.02V Current measurement error: less than 1.2% + -0.002A Test data range: 999.9Ah (Ah, 1Ah=1000mAh) or 9999Min (minutes) when the value is large, switch by decimal point shift, when it is lower than 10Ah, it is displayed as X.XXX, and above 10Ah, it is displayed as XX.XX, This type of push. Finished product size: 54mmX41mmX17mm (length X width X height) Board and accessories weight: host 25g, two 5W ceramic resistor 9g, 50W resistance about 27g (including line) How to use (default factory mode): 1. The battery under test should be fully charged first. 2. Connect the positive pole of the battery under test to the positive input, the negative pole to the input negative pole, and the reverse polarity (the reverse may damage the circuit)! Connect the load to the output positive and output negative, and give the tester micro USB working power (please use the mobile phone charging head, do not use desktop or notebook USB power supply), the battery voltage is displayed at this time. 3. To start the test directly, just press the “OK” button, the tester can automatically set the appropriate termination voltage SKU - 1557935