5.0/ 5.0
100% pembeli merasa puas
3 rating • 3 ulasan
5(3)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 986
Subtotal
Rp26.500
WTV020 Serial MP3 Player Micro SD TF Card Module WTV020-SD-16P
Rp26.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Elektronik
WTV020-SD-16P is a low cost and easy to use MicroSD MP3 module which supports WAV and AD4 formats. It support upto 1GB SD cards. It requires a 3.3V power supply for its operation and its power consumption is very low. You can easily copy voice files to SD Card using PC and it should be in FAT format. This module can be easily interfaced with Arduino Boards, Microcontrollers etc. It can also be used as standalone without any MCU. Please read the datasheet carefully before using this module.
It has following modes of operation.
MP3 Mode – Play / Stop, Next, Previous, Vol+ and Vol- functions
Key Mode 1 – Having 3 group of voice. One key triggers one group with Vol+ and Vol- controls.
Key Mode 2 – Having 5 group of voce. One key triggers one group.
Loop Play Mode – This mode will play voice automatically after power up. It doesn’t needs any trigger. Another feature of this mode is memory feature, ie if the power was cut when you are playing 2nd voice, during next power up it automatically plays 2nd or 3ed voice.
Serial Mode – This mode allows us to use an MCU to control the module via CLK and DI signals.
Specifications
Max. Memory Size : 1G SD Card or 64MB SPI Flash
Audio Output : 16 bit DAC / PWM output
Operating Voltage : 2.7 ~ 3.5V
Quiescent Current : 3μA
4 bit ADCPM files are supported
Sampling rate from 6KHz to 36KHz for AD4 voice format
Sampling rate from 6KHz to 16KHz for WAV voice format
It has following modes of operation.
MP3 Mode – Play / Stop, Next, Previous, Vol+ and Vol- functions
Key Mode 1 – Having 3 group of voice. One key triggers one group with Vol+ and Vol- controls.
Key Mode 2 – Having 5 group of voce. One key triggers one group.
Loop Play Mode – This mode will play voice automatically after power up. It doesn’t needs any trigger. Another feature of this mode is memory feature, ie if the power was cut when you are playing 2nd voice, during next power up it automatically plays 2nd or 3ed voice.
Serial Mode – This mode allows us to use an MCU to control the module via CLK and DI signals.
Specifications
Max. Memory Size : 1G SD Card or 64MB SPI Flash
Audio Output : 16 bit DAC / PWM output
Operating Voltage : 2.7 ~ 3.5V
Quiescent Current : 3μA
4 bit ADCPM files are supported
Sampling rate from 6KHz to 36KHz for AD4 voice format
Sampling rate from 6KHz to 16KHz for WAV voice format
Ada masalah dengan produk ini?