Chemical Guys V36 Optical Grade Cutting Polish

Original product, made in USA V36 is the great all-around cutting-polish that eliminates light to moderate paint defects amp; imperfections from all paint types, then finishes like a fine polish. V36 is formulated for fast cutting with optical grade diminishing abrasives that restore both old paint finishes amp; freshly-painted panels. The advanced polish cuts through light to moderate paint defects, swirls, scratches amp; oxidation, then finishes with superior luster fit for final polish results on most paints. V36 contains no fillers or oils, so the results you see are the results you get! V36 is is powder-free, dust-free and is formulated for extended work time. Featuring with micro abrasives that rapidly eliminate imperfections amp; remove 2000-2500 grit sanding scratches, swirls amp; holograms. It delivers a perfect finish with fewer passes and is equally effective on ceramic finishes amp; conventional clear coats. It is the preferred finishing polish for repairing optical plastic after wet-sanding amp; compounding faded amp; hazy headlights amp; taillights. The water-based formula is blended with advanced lubricants for extended work time and a minimal dusting profile. HOW TO USE Shake well, apply 4-5 drops to desired pad. Dab product out evenly across 2 #39; x 2 #39; section. Speed setting to 1 (DA) or 1000-1500 rpms (RO) to spread product. For DA: increase speed to 5-6 amp; using moderate pressure work area in 2-3 passes until becomes clear. Follow with light pressure to finish. For RO: using just the weight of the machine (no pressure) work area in 3-4 passes until clear. For final pass, adjust speed to between 1200-1800 rpms. Work until optical clarity is achieved. Remove residue with a microfiber. 16 oz. (473 mL)