NEJE 40W/50W Laser Module Kit Cutting Engraving Module Laser Head 450nm Blue Light With TTL / PWM Modulation for DIY Creation

SELAMAT DATANG DI TOKO KAMI

Controller : GRBL
Is Smart Device : YES
Origin : Mainland China
Certification : CE,FCC,RoHS,UL
Model Number : NEJE-Module-30W/40W/50W
Condition : New
Brand Name : NEJE
CNC or Not : CNC
Brand : NEJE
Optical power output : 2.5W~7.5W
Laser Module : E30130/N30820/N30610/B30635
Beam Shape : Dot (Focusable)
Life Time : 10000-20,000 hours


HOW TO CHOOSE NEJE LASER MODULE

B30635is a module specially designed for wood grayscale images and micro-engraving;

N30820 and N40630have strong comprehensive capabilities, the optical power is 5.5 - 7.5W output, and the focus is square light spot, good at carving with wood , rubber stamping, glass, transparent acrylic and cutting Plywood, black acrylic, cloth, etc...N30610, A40630, A30130modules have very fine square light spots, and are better at high-resolution engraving and grayscale engraving of hard materials. A40630 and A30130 also have strong cutting ability and are suitable for cutting Plywood, mdf board and black acrylic.F30130, E30130are the series of modules specially designed by NEJE for long-time cutting. These four modules are fixed focal length modules, which require clean air source support, F30130 is 10mm focal length, good at cutting plywood and metal engraving less than 4mm, E30130 is 20mm focal length, through internal NEJE optical processing, the spot shape is square, suitable for cutting materials with strong symmetry requirements such as model aircraft

N40630 Module + FREE Air Assist Package Included

1 x Air Assist

1 x N40630 Laser Engraving Module

1 x Laser Module Sliding slot

1 x 4 Pin Cable(320mm Cable)

1 x NEJE interface tranfer board

1 x 2.5mm L-shaped wrench

1 x 5mm L-shaped wrench

1 x 3pin input cable

1 x 2pin TTL cable

A40630 Module + FREE Air Assist Package Included

1 x Air Assist

1 x A40630 Laser Engraving Module

1 x Laser Module Sliding slot

1 x 4 Pin Cable(320mm Cable)

1 x NEJE interface tranfer board

1 x 2.5mm L-shaped wrench

1 x 5mm L-shaped wrench

1 x 3pin input cable

1 x 2pin TTL cable

A30130 Module Feature:

-Extended engraving module Thanks to optical processing, the A30130 module has a small and large divergence angle, it can engrave stainless steel directly, and the maximum cutting thickness is 18mm. Built-in fast smart drive, the temperature feedback can be timely and intelligently adjust the fan heat dissipation. Safe and quiet to use.

-More materials, clearer Wood, MDF, leather, paper, cotton, etc. are accepted. The cut edges are very clean. Masking spray can etch stainless steel, glass, clear acrylic, etc.

-Portable professional control software] 32-bit control system, the fastest speed can reach 200,000 mm/min, compatible with GRBL, Lightburn, NEJE software of app (Android, you can change it by sharing photos with your brand. Mobile phone or select pictures from album.

-Perfect after-sales service] The whole machine is guaranteed free of charge for 2 years (engraving module: 2 years and 20,000 hours warranty) and parts at risk are shipped worldwide within 24 hours

Packing List

1 x FREE Air Assist

1 x laser module

1 x sliding card slot

1 x L wrench

1 x L-shaped small wrench

1 x interface adapter board

1 x 4pin laser line

1 x 3pin 2.54 interface output cable

1 x 2pin TTL control line

E30130 Module Packing List:

1 x FREE Air Assist

1 x E30130 Laser Engraving Module

1 x Laser Module Sliding fixture

1 x 4 Pin Cable(30cm)

1 x 2pin yellow and black signal line + 3pin input line

1 x NEJE Interface adapter board

1 x 2.5mm L-shaped wrench

1 x 5mm L-shaped wrench

Detail B30635 Vs N30610 Vs N30820 Laser Module

N30820 NEJE Module Specification
Model NEJE Module N30820

Heatsink Material Aircraft Aluminum + Brass Shell
Luminous Color Blue
Laser diode NUBM0A with NEJE Cap technology
LD Current 3.2A
Section Size 30mm x 30mm
Cooling Mode 40mm copper core + Heat Sink Groove+ Thermal silicone grease + 15000 rpm cooling fan
Dimension 80 * 30 * 30mm
Intput Voltage DC 12V
Can Engrave MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum
Can Not Engrave Metal/Glass/Stone/Ceramics/PCB/Stainless Steel/Reflective Material/ Transparent Material
Technical Parameters
Laser Output Power 5.5W (5500mW)
Wavelength 445-450nm
Beam Shape Dot (Focusable)
Working Voltage DC 12V
TTL&PWM Modulation YES, Compatible with Both TTL & PWM Modulation
Input Voltage DC12V
PWM/TTL Input

DC3.3V-12V
Input Interface PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin (+,-) + (PWM/TTL,-)
NOTE

Temperature interface can be disconnectedNEJE provides text instructions for temperature acquisition on wiki.
Drive Mode External ACC
Safe temperature range

Module weight

202g ( The lighter the weight, the smaller the move inertia, the better the performance )
Life Time

20,000 hours

Test
Material: Plywood, thickness 3mm
Speed 330, cutting 3 times, each cutting 1.0mm
Speed 200, cut 2 times, each cut 1.5mm
Speed 100, cut once, cut 3mm each