PV Microinverter DC20-60V To AC120V-230V Auto 600W Smart Inversor

Is Smart Device : YES
is_customized : Yes
Output Frequency : 50-60Hz
Output Power : 500 - 1000W
Weight : 2kg
Model Number : solar inverter
Brand Name : FARSUN POWER
Origin : Mainland China
Certification : CE
Power : 600W


DC20-60V To AC120V-230V Auto. 600W/700W/800W/1000W Smart Inversor Solar APP Monitor WIFI Grid Tie Micro Inverter

Feature:

1.Green light steady =Microinverter in generating.
2. Red flash=Microinverter in waiting.
3.Red light steady
a. Island protection.
b.Over-temperature protection.
c.Over / low AC voltage protection.
d.Over / low DC voltage protection.
e.Over / low AC frequency protection.
f.Fault. LED DISPLAY INSTALLATION PROCEDURES *Prior to installing the Microinverters,

Please verify that the utility voltage at the point of common grid connection matches the voltage rating on the Microinverter label.
Step 1 - Attaching the Microinverters to the Racking.
a. Mark the location of the Microinverter on the rack, with respect to the PV module junction box or any other obstructions.
b. Mount one Microinverter at each of these locations using hardware recommended by your module racking vendor.

Step 2 - Connecting the Microinverter AC bus cable one by one, Please do NOT exceed the Maximum Units per Branch.

Step 3 - Connecting Microinverters to the PV Module, Please do NOT exceed PV panel(s) VOC over inverter max. input voltage.

Step 4 - Tighten the Bus Cable End Cap at the end of AC bus cable.

Step 5 - Install the AC Branch Circuit Junction Box, Wire the conductors of the AC bus cable: L-BROWN,N-BLUE,G-GREEN&YELLOW.
Connect the AC branch circuit junction box to the point of utility-grid Interconnection.

Step 6 - Double check all Microinver