High Gloss / Gloss / Satin / Matt Varnish 237 ml Liquitex Professional - Satin

Matte, Satin, Gloss and High Gloss Varnishes

Permanent VarnishTexture:FluidSheen:Matte, Satin, Gloss or High GlossRelative Opacity:Transparent when dry



Water-based TechnologyTranslucent when wet, clear when dryLow OdorPermanent and DurableResists discoloring (non-yellowing, non-fogging) due to humidity, heat and ultraviolet light.Can be used with Spray Paint, Heavy Body, Soft BodyDry to a non-tacky, hard, flexible surface that is resistant to dirt retentionHard, archival, non-yellowing and water resistant when dryProtects acrylic color from harsh elementsFor interior and exterior use

Spray application

Use outdoors or in a well-ventilated area at temperatures greater than 5C.Ensure the artwork is fully dry before applying varnish. Shake can for one minute before use.Hold can 8-10" from the surface. For best results spray artwork flat.When finished spraying, turn can upside down and push spray button for 5 seconds to prevent clogging.Allow at least 12 hours drying between coats of varnish.Application
Apply as a final varnish over dry acrylic paint.Varnish surface and environment must be clean, dry and dust free.Acrylic paintings must be completely dried and cured for 48-72 hours before varnishing.Application may be done by brush or spray. Generally a sprayed application will be thinner, smoother and more even. Rolling or sponging application is not recommended.Caution: Acrylic paints and mediums become increasingly brittle in cold weather. Do not apply below 60 degrees.Brush and Paint Pad Application
Use a wide, soft hair brush or paint pad (vacuum the pad prior to use to remove lint). Size of area to be varnished will determine the size of the applicator. The smaller the surface area, the narrower the brush. Generally, a 1-4" flat brush is used.Apply Liquitex varnish in 1-3 thin coats, rather than 1 thick coat. A thick coat will take longer to dry, may dry cloudy, may drip