Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp2.500.000
New 150MM Polycarbonate Plastic Vacuum Dryer Laboratory Dryer Transpar
Rp2.500.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: electronic
New Model:
The newly upgraded ball valve has simpler operation, better sealing performance and longer life!
Feature:
1. Long vacuum maintenance time: thirty-days after vacuum evacuation, the degree of vacuum change is less than 6%.
2. Imported high-quality polycarbonate injection molding.
3. Avoid using sealing grease. The top and bottom parts of the vessel are sealed with high-quality silicone rubber O-rings.
4. A flat retaining ring on the top of the vessel makes it easy to hold. When the top plug is sealed, it can cooperate with the ring-shaped protrusion at the bottom to stably stack multiple.
5. There is a conical threaded hole on the top and the side of the base. The valve can be screwed and fixed on any screw hole. The other screw hole is equipped with a vacuum gauge, which is convenient for accurately understanding the vacuum status in the container at any time, and can also be sealed with a wire plug.
6. The valve core is made of precision metal materials, and the air intake flow is gradually and gradually adjusted from small to large.
7. After the needle valve is tightened slightly with your fingers, the air leakage is zero under one atmospheric pressure.
8. Needle valve and air pipe are connected by quick-change joint. Its connector can rotate 360 degrees freely, and the air pipe adopts imported soft nylon tube.
9. Two needle valves can be installed at the same time, one for evacuation and one for introducing inert gas to realize vacuum preservation under inert gas atmosphere.
Parameter:
Inner Diameter: 150MM
Outer Diameter: 173MM
Total Height: 220MM
Diameter of the partition: 120MM
Air interface size: 8MM
Ambient Temperature: -40~120°C
The newly upgraded ball valve has simpler operation, better sealing performance and longer life!
Feature:
1. Long vacuum maintenance time: thirty-days after vacuum evacuation, the degree of vacuum change is less than 6%.
2. Imported high-quality polycarbonate injection molding.
3. Avoid using sealing grease. The top and bottom parts of the vessel are sealed with high-quality silicone rubber O-rings.
4. A flat retaining ring on the top of the vessel makes it easy to hold. When the top plug is sealed, it can cooperate with the ring-shaped protrusion at the bottom to stably stack multiple.
5. There is a conical threaded hole on the top and the side of the base. The valve can be screwed and fixed on any screw hole. The other screw hole is equipped with a vacuum gauge, which is convenient for accurately understanding the vacuum status in the container at any time, and can also be sealed with a wire plug.
6. The valve core is made of precision metal materials, and the air intake flow is gradually and gradually adjusted from small to large.
7. After the needle valve is tightened slightly with your fingers, the air leakage is zero under one atmospheric pressure.
8. Needle valve and air pipe are connected by quick-change joint. Its connector can rotate 360 degrees freely, and the air pipe adopts imported soft nylon tube.
9. Two needle valves can be installed at the same time, one for evacuation and one for introducing inert gas to realize vacuum preservation under inert gas atmosphere.
Parameter:
Inner Diameter: 150MM
Outer Diameter: 173MM
Total Height: 220MM
Diameter of the partition: 120MM
Air interface size: 8MM
Ambient Temperature: -40~120°C
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan