GEPRC Cinebot30 HD DJI O3 FPV Drone - NO, PNP

GEPRC Cinebot30 HD O3 FPV Drone Specifications Model: Cinebot30 HD O3 Quadcopter Brand: GEPRC Frame: GEP-CT30 O3 Wheelbase:127mm Isolation Plate:2mm Main plate:3mm Bottom plate:1.5mm FC: GEP-F722-45A AIO V2 MCU: STM32F722RET6 IMU: ICM-42688-P VTX: DJI O3 Air Unit Camera: DJI O3 Propeller: HQ prop T76mm Antenna: DJI O3 Antenna Charge connector: XT60H-M Motor: SPEEDX2 1804-2450KV（6S Version） Weight:O3 version 232.2g (excluding battery, the above are TBS Nano RX version) Receiver: PNP, TBS Nano RX, ELRS 2.4G Recommended Battery:LiPo 6S 1100mAh -1300mAH (6S Version Flight time 8-11 minute) GPS: GEPRC M10 GPS (if variant GPS is selected) Package Includes 1xCinebot30 HD O3 Quadcopter PNP (if variant PNP is selected) 1xCinebot30 HD O3 Quadcopter with Happymodel ExpressLRS Nano 2.4GHz EP1 TCXO RX RX (if variant ELRS is selected) 1xCinebot30 HD O3 Quadcopter with TBS Crossfire Nano RX (SE) (if variant TBS is selected) 2xHQProp T76MM（pair） 1xBattery strap M15*200mm 1xBattery strap M15*220mm 2xBattery Silicone Pads 1xSet of screws 1xSet of screwdrivers 1xGoPro camera mount holder 1xSet of screws 1xSet of screwdrivers 1xAntenna fixed tube 1x GEPRC M10 GPS (If GPS Variant is selected) 1x GEPRC Cinebot30 GPS mount (If GPS Variant is selected) NOTE: 1. Factory Pre Installed GPS is not available from the factory, therefore for those who order with GPS, we will require to open the drone and manually installed the 3D print mount and GPS onto the drone. 2. All the drone comes PNP means no Rx (receiver). Variant with ELRS 2.4G will require us to solder the receiver ELRS2.4G Happymodel EP1 receiver to the drone. Recommended battery: https://www.tokopedia.com/e-hely/pulse-neo-1250mah-6s-22-2v-100c-fpv-racing-lipo-battery