ENERGETIC New Lab X1 Series PEI Flexible Spring Steel Build Plate Double Side Smooth PEI Magnetic Bed

ENERGETIC New Lab X1 Series PEI Flexible Spring Steel Build Plate Double Side Smooth PEI Magnetic Bed 257x257mm

Featur :

Model Number : T-257-8
Item Type : Heatbed
Brand Name : FLEXBED
Origin : Mainland China
Color : Golden or Black
Application : 3D printer heated bed
Product : smooth pei surface
Size : 257x257mm


ENERGETIC New Lab X1 Series PEI Flexible Spring Steel Build Plate Double Side Smooth PEI Magnetic Bed 257x257mm

Advantage:

Material

:PEI film is 0.2mm thick,
Made in Europe,the Steel plate is 0.5mm thick.

Size:

257.5 x257.5mm/10.14x10.14inch PEI Build Plateis suitable for BambuLab X1 and similar size 3D printers. Perfect for PLA, ABS,ext.

Stronger Magnetic Ddhesion:

PEI 3d printer bed more flexible and resistant to bending.Great first-layer adhesion,make sure the model can be firmly attached to the surface of the print platform.ENERGETIC PEI bed platforms had solid adhesion and the print went well.

Easy Print Removal:

PEI 3d printer platformis flexible and magnetic, making it easy to move off the platform and take away the printing model. The prints are pretty easy to remove once you're done printing.

Easy to Install:

PEI spring steel sheet is flat and flexible, it comes without magnetic base, but could be magnetically attracted to thehotbed,becauseBambu Lab X1 3D printer heated bed is magnetic, just put and print.

Easy to Clean:

PEI 3d printer bed adhesive use a soft cloth to clean the dust. Gently wipe the stain with low concentration of alcohol.

Package List

1 pc 257.5 x257.5mm Smooth PEI Spring Steel Build Plate

Notice:

Please tear off Smooth PEI surfaces Protective film before using it.

Important Information:

1.Recommend print temps

PLA 60C

HTPLA 60C

PETG 70-80C

PCTG 70-80C

ABS 100C

2.Product Usage Guidelines

PETG/PCTG/TPU If you are not careful with your 1st layer you can risk bonding the PETG/PCTG/TPU to the PEI surface. This will damage the surface. To prevent damage to the surface apply hairspray or PVA gluestick before printing PETG/PCTG/TPU on the PEI

Part Removal Make sure your plate is at close to room temp (under 30C) before removing parts. If you remove when hot it more likely to damage the surface

Happy

Thanks for shopping