READY STOCK VAC9010H-90V Hall Coulombmeter Bidirectional Detection Ammpere 0-500A

Specification:
Type: VAC9010H
Screen resolution: 0.1A
Voltage measurement range: Own power supply 12-90V ; External power supply 0-90V
Current accuracy: ±3%±5 word
Accuracy voltage: ±2%±5 word
Screen resolution tension: 0.01V
Screen resolution capacity: 0.1AH
Screen resolution time: 0.01H(1 min)
Measurement rate: 5 times/ second
Type of protection and define(OVP): 0.01V-90V
Type of protection and define(OPP): 0.01W-9.99KW
Type of protection and define(LOP): 0.01V-90V
Type of protection and define(OCP): 0.1-100A
Type of protection and define(OAH): 0.01AH-9999AH
Type of protection and define(OFT): 1min-99hour59min
Size: approx. 79x43x26mm(3.11x1.69x1.02in)
Installation opening: 76.5x39.2mm

For the user to charge and discharge can be automatic identification and bidirectional current direction, no need to change the direction of the wiring.
Aafter turning off the memory function, turning off the ah number, it is convenient for people to observe and measure.
AH number and current reset function, do not affect the next measurement.
Voltage, current, charging capacity ah, wh, time, energy will show at the same time, too, shou all information clearly.
With the output and off function, flexible cab to open or disconnect the output (relay need).
With over voltage, over current, over power, litmited time, load protection function, etc.
Can calibrate online, give a convenience for the customer to correct the error in time.
LCD panel can be manually put out or less than 300m automatically screen out in one minute.
By detecting the current sensor of the hall, the current through the round hole of the thr wire through the thr sensor, both the current of the side direction can be detected. It is safe and convenient for users.
Applicable scope: charge monitoring and discharge of electric vehicle battery, photovoltaic electricity monitoring system and so on, the first current empty charge charging needs to clean.