Brocade 300 24-Port FC 8GB Fibre Channel SAN Switch 8 Ports aktiv DL-3

Component Specification

Form factor Standalone or 1U rack mount
Ports Up to 24 SFP/SFP+ ports. 8 ports licensed by default; up to two optional 8-port license packs.
Media types 8 Gb FC SFP+ transceivers: short-wave (SW), long-wave (LW), extended long-wave (ELW).
Port speeds 2/4/8 Gbps auto-sensing, full-duplex (8 Gb FC SFP+ transceivers)
FC port types

Full Fabric mode: FL_Port, F_Port, M_Port (Mirror Port). E_Port requires an optional license.
Brocade Access Gateway mode: F_Port and NPIV-enabled N_Port.
Data traffic types Unicast (Class 2 and Class 3), multicast (Class 3 only), broadcast (Class 3 only).
Classes of service Class 2, Class 3, Class F (inter-switch frames).
Standard software Full Fabric mode (standalone: single-switch fabric), Access Gateway (requires 24 ports be licensed), Advanced Zoning, Adaptive Networking, Advanced Diagnostic Tools.
Optional software Full Fabric E_Port (multi-switch fabric), ISL Trunking, Fabric Vision, Extended Fabric.
Performance Non-blocking architecture with wire-speed forwarding of traffic:

2.125 Gbit/sec line speed, full duplex
4.25 Gbit/sec line speed, full duplex
8.5 Gbit/sec line speed, full duplex
Up to 192 Gbps aggregated throughput
Up to 0.7 microseconds local switching latency

Scalability

Maximum number of switches in the fabric: 239
Maximum frame size: 2,112-byte payload
Maximum number of frame buffers per switch: 700
Maximum number of ports per ISL trunk: 8 (Requires an optional license)

Cooling Three 2+1 redundant non-hot-swap fans. Non-port to port side airflow.
Power supply One fixed 75 W AC (100 - 240 V) power supply (IEC 320-C14 connector).
Hot-swap parts SFP/SFP+ transceivers.
Management ports One 10/100 Mb Ethernet port (UTP, RJ-45); one RS-232 port (RJ-45); one USB port (for additional firmware/log/configuration files storage).
Management interfaces EZSwitch Setup; Web-based GUI (Brocade Web Tools); CLI; SMI-S; SNMP. Optional Brocade Network