SMARTGEN GENSET CONTROLLER HGM 7220

CUCI GUDANG AKHIR TAHUN 2023.
GO GRAB YOURS FAST.


Pengontrol genset seri HGM7200 digunakan untuk otomasi genset dan sistem kontrol monitor unit tunggal untuk mencapai start / stop otomatis, pengukuran data, perlindungan alarm dan yang disebut "three remote" yaitu kendali jarak jauh, pengukuran jarak jauh dan komunikasi jarak jauh

Power Supply：DC(8-35)V
Power Consumption : <3W (standby ≤2W)
Alternator Frequency : 50/60 Hz
Speed sensor voltage : 1.0V to 24.0V (RMS)
Speed sensor Frequency : 10,000 Hz (max.)
Start Relay Output : 16 Amp DC28V at supply output
Fuel Relay Output : 16 Amp DC28V at supply output
Auxiliary Relay Output (1) : 7 Amp DC28V at supply output
Auxiliary Relay Output (2) : 7 Amp 250VAC voltage free output
Auxiliary Relay Output (3) : 16 Amp 250VAC voltage free output
Auxiliary Relay Output (4) : 16 Amp 250VAC voltage free output
Auxiliary Relay Output (5) : 7 Amp DC28V at supply output (HGM72X0 only)
Auxiliary Relay Output (6) : 7 Amp DC28V at supply output(HGM72X0 only)
Case Dimensions：197*152*47(mm)
Panel Cutout：186*141(mm)
C.T. Secondary : 5A rated
Working Conditions : Temperature: (-25~+70)°C; Humidity: (20~90)%RH
Storage Condition : Temperature: (-30~+80)°C
Operating Temp. ：(-25~+70)℃

Protection Level
• IP55: when waterproof rubber seal installed between the controller and panel fascia.
• IP42: when waterproof rubber seal is not installed between the controller and panel fascia.
Object : among in input/output/power
Quote standard: IEC688-1992
Test way: AC1.5kV/1min
leakage current: 3mA
Weight：0.75kg

Alternator Input Range :
• 3-Phase 4-Wire : 15VAC - 360VAC (ph-N)
• 3-Phase 3-Wire : 30VAC - 620VAC (ph-ph)
• Single-Phase 2-Wire : 15VAC - 360VAC (ph-N)
• 2-Phase 3-Wire : 15VAC - 360VAC (ph-N)