Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp3.303.000
JK SMART BMS JK-B2A8S30P 2A Active Balance for Lifepo4 Battery 4S 5S 6S 7S 8S 300A 48V 60V BT Li-Ion 18650 Camping Battery Ebike
Rp3.303.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
product advantages：
◆Active balance, good durability, long life, good balance and stable performance
◆Real-time active energy transfer equalization with supercapacitor as the medium (patent number: ZL 2019 2 0479589.6)
◆Single voltage range 1V~5V, equalization accuracy ±5mV
◆It can achieve 2-10A continuous balanced current, ensure battery consistency, improve battery cruising range, and delay battery aging.
◆Mobile phone Bluetooth communication, equipped with mobile APP, real-time view of battery status, support Android and IOS operating systems.
◆Support balanced cascading, suitable for more than 24 battery packs.
◆Suitable for lithium iron phosphate, ternary lithium, lithium titanate and other battery types.
Package
1 * BMS(Bluetooth bulit-in)
1 * Temperature sensor(40cm)
1 * Balance Wires(75cm)
1 * Active Switch(15cm)
6 * Cables
6 * Screws
1 * Heating cable (Only for BMS With Heat Function)
H: BMS With Heat Function
C: BMS With CANBUS chip Bulit-in
NOTE:
Due to the different voltage ranges supported.
Therefore, among the accessories of B1A8S20P/B2A8S20P,RS485, LCD and other BMS are not common.
Power Board is the same version.
Please choose to buy them carefully. Thank you
For instructions on heating cables,the green 5PIN cable of the heating cable needs to be linked to the heating pad,and the rest of the black and red cables are linked to the smart charger(after the smart charger links the BMS,it detects the temperature of the battery through the BMS,which automatically monitors the charging status of the battery)
Description of heating function:
Battery temperature is below low temperature charge protection, turn off charging, turn on heating.
Cryogenic charge protection is a parameter that can be set within APP
The heating power depends on the battery voltage and the resistance value of the heating film.
1 Internal/2 External Temperature Sensors (Detect battery temperature)
LCD and RS485 interfaces are configured by default
Bluetooth link for
◆Active balance, good durability, long life, good balance and stable performance
◆Real-time active energy transfer equalization with supercapacitor as the medium (patent number: ZL 2019 2 0479589.6)
◆Single voltage range 1V~5V, equalization accuracy ±5mV
◆It can achieve 2-10A continuous balanced current, ensure battery consistency, improve battery cruising range, and delay battery aging.
◆Mobile phone Bluetooth communication, equipped with mobile APP, real-time view of battery status, support Android and IOS operating systems.
◆Support balanced cascading, suitable for more than 24 battery packs.
◆Suitable for lithium iron phosphate, ternary lithium, lithium titanate and other battery types.
Package
1 * BMS(Bluetooth bulit-in)
1 * Temperature sensor(40cm)
1 * Balance Wires(75cm)
1 * Active Switch(15cm)
6 * Cables
6 * Screws
1 * Heating cable (Only for BMS With Heat Function)
H: BMS With Heat Function
C: BMS With CANBUS chip Bulit-in
NOTE:
Due to the different voltage ranges supported.
Therefore, among the accessories of B1A8S20P/B2A8S20P,RS485, LCD and other BMS are not common.
Power Board is the same version.
Please choose to buy them carefully. Thank you
For instructions on heating cables,the green 5PIN cable of the heating cable needs to be linked to the heating pad,and the rest of the black and red cables are linked to the smart charger(after the smart charger links the BMS,it detects the temperature of the battery through the BMS,which automatically monitors the charging status of the battery)
Description of heating function:
Battery temperature is below low temperature charge protection, turn off charging, turn on heating.
Cryogenic charge protection is a parameter that can be set within APP
The heating power depends on the battery voltage and the resistance value of the heating film.
1 Internal/2 External Temperature Sensors (Detect battery temperature)
LCD and RS485 interfaces are configured by default
Bluetooth link for
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan