RTD PT100 Transmitter -100 ~ 500 C Output 0 - 5V/ 0 - 10V

kRTD-to-voltage, PT100 turn 0-5V 0-10V linear conversion, pt100 temperature transmitter module

PT100-to-voltage module
This is a linear conversion module, the internal chip processing of the input signal is converted to heat resistance temperature (voltage signal).

There are two output voltage range selection.
Module parameters
1, operating voltage: 9V ~ 24V
2, the input resistance: Pt100 RTD
3, the output voltage: 0.00V ~ 5.00V / 0.00V ~ 10.00V
4, temperature range: -100 to + 500 (degrees).
5, the output mode: S2 pads on the circuit board: open (output 0.00V ~ 5.00V); shorted (output 0.00V ~ 10.00V), default is open. S1 and J1 unused pads.
6. Applications: remote data acquisition and control equipment;
7, size :( length) 26mm * (width) 23mm * (high) 10mm
8, the module interface: 12V: positive power supply Interface (9V ~ 17V).
G: Power ground interface.
IN: RTD positive electrode interface.
G: RTD negative interface.
OUT: signal output interface (0.00V ~ 5.00V / 0.00V ~ 10.00V).
G: Power ground interface.

Note: When the output 0.00V ~ 10.00V, power supply voltage to 15 volts.


Output (0.00V ~ 5.00V) Resolution: 0.0083333V / degree C(V / C)
Output (0.00V ~ 10.00V) Resolution: 0.0166666V /degree C (V / C)

( Formula to calculate the measured temperature output voltage (V) / resolution) -100 degree C= measured temperature (degree C).