Jumper 2.4G ELRS TX Module AION NANO T-PRO/ExpressLRS ELRS

Model Number : ELRS For Vehicle Type : Airplanes Tool Supplies : Assembled class Four-wheel Drive Attributes : Assemblage Remote Control Peripherals/Devices : Receivers Upgrade Parts/Accessories : ELRS TX Module RC Parts amp; Accs : ELRS TX Module Material : Composite Material Brand Name : Xiangtat Origin : Mainland China Recommend Age : 12+y Use : Vehicles amp; Remote Control Toys Product: Jumper 2.4G ELRS TX Module Model Name: AION TX NANO Screen: OLED MCU: ESP32 RF Output Power: 10-500mw Frequency Range: 2.4GHz-2.5GHz Firmware: ExpressLRS Antenna: Directionality Diamond antenna for best signal penetration Working Voltage DC5-8.4v Maximum receive refresh rate: 500Hz Menu button: 5 directions button Voltage: DC6-8.4V Current: 400mA Port: Firmware update: via Wifi, UBC-C, or Blue tooth Specifications Dimension: 17.2*8.8*4.3mm (L x W x H) Weight: 1.1g Number of Channels: 16Ch Operating Voltage Range: 3.5V~6V Operating Current: 60mA@5V Operating Range: Full range Distance: 5KM Compatibility: radios in ELRS 2.4 mode Binding Procedure Binding is the process of uniquely associating receiver to a transmitter/transmitter RF module . A transmitter internal or external RF module can be bound to multiple receivers (not to be used simultaneously).A receiver can only be bound to one RF module.Follow the steps below to finish the binding procedure. 1.Put the transmitter/transmitter RF module into binding mode 2.Power on the receiver, the receiver #39;s green light will flash and the receiver is in binding mode. Bind in the radio, the receiver #39;s green light will be always on, then the binding is completed. If the receiver is not bound in 20 seconds after power-on, the receiver will get into Wifi firmware updating mode, the green light will flash at the same time. Failsafe Failsafe is a useful feature which is for a preset channel output