# Omron photoelectric switch E3Z-LS63 E3ZLS63 DC NPN DC12 24V PC22

Omron photoelectric switch E3Z-LS63 E3ZLS63 DC NPN DC12-24V PC22
Feature:
Sensing method:Distance-setting
Sensing distance:2mm to 80mm (White paper 100 x 100 mm)
Setting range:20 to 80mm (White paper 100 x 100 mm)
Spot size:2.5 mm dia. Max. (At sensing distance of 50 mm +/- 10 mm)
Differential distance:2% Max. of setting distance
Reflectivity characteristic (black-white error):5% Max. of setting distance
Light source:Red LED
Power supply voltage:12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max.)
Current consumption:30 mA DC Max.
Control output (Output type):NPN open collector output
Control output (Load current):0 to 100 mA
Control output (Residual voltage):(DC) 1 V Max. (Load current 100mA Max.)
Operation mode:Light-ON/Dark-ON selectable
Load power supply voltage:26.4 VDC Max.
Protective circuit:
Surge suppressor
Output short-cut protection
Power supply reverse polarity protection
Mutual interference prevention
Response time:1 ms Max.
Sensitivity setting:5-turn endless adjustment
Ambient illuminance:Incandescent lamp: 3000 lux Max., Sunlight: 10000 lux Max.
Ambient temperature:Operating:
-25 to 55
Storage: -40 to 70
(with no icing or condensation)
Ambient humidity:
Operating: 35 to 85%
Storage: 35 to 95%
(with no icing or condensation)
Insulation resistance:20 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength:1000 VAC at 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance:10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance:500 m/s**2 for 3 times each in X, Y, and Z directions
Degree of protection:IEC60529: IP67
Connection method:Pre-wired models Cable length: 2 m
Indicator:Operation indicator (orange), Stability indicator (green)
Tightening torque:0.5 Nm Max. (with M3 screw)
Material (case):PBT