Automatic transfer switch ATS 2P 63A Otomatis PLN ke Genset / Inverter

2P 63A 400V MCB type Dual Power Automatic transfer switch ATS Rated frequency 50/60Hz

ATS
Berfungsi Untuk Memindahkan Power listrik Secara Otomatis / dari listrik PLN ke Generator / Panel Surya Inverter

Rated: voltage 400V 50/60Hz
Max : 63A. 13.800 WATT

-Matters need attention
When users test or operate please follow relative rules and pay attention to the following matters to ensure use our ATES correctly.

1)Neutral conductor N can't be connected in wrong way, must connect reliably, otherwise ATSE can't operate properly, even burn controller and motor.
2)The protective grounding of ATSE must be connected reliably to ensure safety.
3)Detection sampling signal for controller work power and main power supply is taken from Power supply side of main circuit, and work power of auxiliary connection terminal used for connect indicator is taken from main circuit, so can't have voltage test between spare terminals (unless dismantle the secondary wires). Can have power frequency voltage test between main circuit and shell or between secondary auxiliary terminals and shell.

10. Simple troubleshooting
When users find fault can request professional to test and deal with. Keep Away for Safety when operate. Or contact our Specialized Service Departments.

1) Double Power are both switched on, but ATSE can't transfer automatically

1 Check Auto/manual should be in automatic position.
2 Check if incoming line is correct or not, if phase sequence is accordance or not, and wiring is solid and reliable or not.
3 Check if the fuse is burned on not.

2) Double power are both switched on, ATSE standby power is switching on.
4 Check if normal power incoming line has voltage or not.
5 Check Commonly used insurance
6 Check if external light is connected in wrong way or not