JOINT GUARD Tape - FIX JOINT Gundam Articulation by GUNPRIMER - 1 SET all size

JOINT GUARD - FIX JOINT Gundam Articulation Special Tape khusus digunakan untuk mengencangkan bagian artikulasi yg kendor longgar dari Gundam / Model Kit / Action Figure lain. Fix artikulasi Joint jauh lebih lama dan kokoh dibandingkan pakai enamel polish (cairan cat kuku dipasaran). Tambahkan Super glue untuk super tight joint! Tape telah dipotong dalam enam ukuran agar sesuai dengan berbagai poros. Tape khusus yang lembut dengan lapisan anti selip di permukaannya, sehingga dapat memperkuat sambungan tanpa memberikan tegangan berlebih pada bagian #34;nya. tersedia dalam berbagai 3 macam ukuran: 1. lebar 1,5mm x panjang (4mm + 6mm) = HG/RG 2. lebar 2mm x panjang (8mm + 10mm) = MG/RE 3. lebar 2,5mm x panjang (12mm + 14mm) = MG - PG 4. satu set sheet total terdiri dari 6 ukuran = 1054 pcs This is a special reinforcing tape to recover the looseness of joints and moving parts of the mechanical model. This joint guard has been developed so that even these loose joint parts can be easily maintained for a long time. Reinforcing tape has been cut into strips in six sizes to suit various shafts. In addition, it is a soft special tape with a non-slip coating on the surface, so it can reinforce the joints without applying excessive tension to the parts. In particular, the joint parts made of PS, which are often found in the latest kits, are easy to loosen, making them ideal for such joints and movable parts. In addition, a total of 1,054 reinforcing tapes are listed, so a single sheet can be used for several dozen mechanical models. ■ How to use 1. Select and paste a joint guard with a size that covers about 2/3 of the loose parts. 2. Use one to three sheets according to the degree of looseness if necessary. 3. When holding heavy parts, attach a small amount of instantaneous adhesive to the side of the tape and dry it. IMPORTANT! Be sure to remove the grease and dust from the surface before apply. wait 24H if use superglue