OV7670 camera module Supports VGA CIF auto exposure control display

Tutorial : http://www•instructables•com/id/OV7670-Arduino-... http://www•instructables•com/id/OV7670-Without-... Description The camera module is powered from a single +3.3V power supply. An external oscillator provide the clock source for camera module XCLK pin. With proper configuration to the camera internal registers via I2C bus, then the camera supply pixel clock (PCLK) and camera data back to the host with synchronize signal like HREF and VSYNC. The OV7670 camera module is a low cost 0.3 mega pixel CMOS color camera module, it can output 640x480 VGA resolution image at 30fps. The OV7670 camera module build in onboard LDO regulator only single 3.3V power needed and can be used in Arduino, STM32,Chipkit, ARM, DSP , FPGA and etc. Specification Optical size 1/6 inch Resolution 640x480 VGA Onboard regulator, only single 3.3V supply needed Mounted with high quality F1.8 / 6mm lens High sensitivity for low-light operation VarioPixel method for sub-sampling Automatic image control functions including: Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC) Image quality controls including color saturation, hue, gamma, sharpness (edge enhancement), and anti-blooming ISP includes noise reduction and defect correction Supports LED and flash strobe mode Supports scaling Lens shading correction Flicker (50/60 Hz) auto detection Saturation level auto adjust (UV adjust) Edge enhancement level auto adjust De-noise level auto adjust