ESTOP | Estoliastic | 20 kg/pail | Aspal sealant untuk jalan beton

Estoliastic Hot Poured Rubber Bitumen Horizontal Joint Sealant Application It is essential that the correct equipment be used for re-melting Estoliastic to ensure that the subsequent performance is not impaired by damage through overheating or pouring at the wrong temperature. The heating apparatus must be equipped with a thermometer, an oil jacket and a means of stirring the molten compound. Direct heating should be limited to low flame and equipment fitted with a mechanically driven stirrer. Note: For small jobs, Estoliastic may be used with a small, directly heated vessel, but great care must be taken to avoid over heating the Estoliastic compound. In these cases, limited quantities of material should be cut up into small lumps and melted gradually in the molten mass whilst stirring. Packing amp; Size Estoliastic 20 kg drum Coverage Estoliastic 194m per drum @ 10*10mm joint 48.5m per drum @ 20*20mm joint 31m per drum @ 25*25mm joint 15.5m per drum @ 50*25mm joint 7.7m per drum @ 50*50mm joint For further information please call or WhatsApp to 085100429888 or visit our website on www.crp.co.id