Watch Demagnetizer Tool Penghilang Medan Magnet Jam Tangan Otomatis

Ready Stock! *) Jangan mengaktifkan demagnetizer terus-menerus dalam waktu yg lama, karena dapat menyebabkan demagnetizer mengalami overheat. Start by holding your watch slightly above the smooth pad on the demagnetizer adjacent to the on/off switch. Some guides will advise that you can start with the watch resting fully on the demagnetizer, but I have found that holding the watch just above the actual plastic (usually by resting my fingertips on the device itself) ensures the best possible performance. Your results may vary, but the important part is coming up in the following steps. With one hand holding your watch, be ready to slowly but purposefully lift the watch straight up and away from the demagnetizer while using your other hand to press and hold the button. The light should come on when you press the button. You can now start to slowly raise the watch away from the device. The distance is not an exact science, but I like to go fairly high as a compass would suggest the area of effect is around 30cm (or about one foot). I usually go until the watch is at my eye line as you want to be well outside of the magnetic field created by the demagnetization tool. As the watch progresses towards the top of its travel, release the button. Bring the watch back down but do not put it back on the demagnetizer (it is a magnet, after all). You have just completed one demagnetization cycle (look at you, you #39;re like a watch wizard!). After each cycle, retest your watch for magnetism until the effect is as minimal as possible.