Atur jumlah dan catatan
Stok Total: 1100
Subtotal
Rp11.038.000
Multi functional OTDR fiber optic tester MOT-50 fiber optic breakpoint fault detector broadband installation OPM touch screen
Rp11.038.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Note: UPC interface is supported by default. If APC is required, please leave a message
Specification
OTDR Technical Specifications
Wavelength(nm) Optional *
1550
1310/1550
1550
1310/1550
1610
Dynamic range(dB)2 Optional*
24
28/26
24
28/26
28
Pulse width (ns)
Testing range
≤150 Km
Event blind zone (m)3
≤1.6m
Attenuation blind zone (m)3
≤8m
±0.05 dB/ dB
Loss threshold (dB)
0.05
Loss resolution ratio (dB)
0.01
Minimum distance resolution
0.05
Sampling point(K)
32-128
Distance uncertainty (m)
±(1 m + 5×10-5×distance + sampling interval)
Distance scope (km)
0.5,1,2,5,10,25,50,100,200
Typical real-time refreshing duration
1s
File format
SOR standard format/PDF/EXCEL
Measurement duration
5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable
Storage
FLASH (EMMC)8G + TF card
Interface type
SC-PC
Remarks:
1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure, without considering the uncertainty caused by optical fiber refractivity.
3. Measuring conditions of blind zone: reflection event is within 5Km, reflection strength is 45dB. Measured by the minimum pulse width.
Specification
Size & Display
5.55 inch OLED screen display, 1280*720 resolution
Network Port
RJ45 cable TDR test
Test cable’s length,Max testing up to 600meter(optional)
Power output
5V 1A power output
UTP cable test
Test UTP cable connection status and display on the screen. Read the number on the screen.detect the near-end, mid-end and far-end fault point of RJ45 cable connector, also can test shield cable
Network test
IP Scan, PPPOE, port flashing, Ping test(optional)
Digital Cable tracer
Search BNC cable, network cable and telephone cable from the mess cables(optional)
Electroscope*(optional)
Voltage range
Frequency
50/60Hz
Alarm type
Sounds and light double alarms
Level
Visual fault locator
10mW visual fault locator with 650nm , emit red laser sources to test multi-mode and single mode fiber’s bending and breakage,
Specification
OTDR Technical Specifications
Wavelength(nm) Optional *
1550
1310/1550
1550
1310/1550
1610
Dynamic range(dB)2 Optional*
24
28/26
24
28/26
28
Pulse width (ns)
Testing range
≤150 Km
Event blind zone (m)3
≤1.6m
Attenuation blind zone (m)3
≤8m
±0.05 dB/ dB
Loss threshold (dB)
0.05
Loss resolution ratio (dB)
0.01
Minimum distance resolution
0.05
Sampling point(K)
32-128
Distance uncertainty (m)
±(1 m + 5×10-5×distance + sampling interval)
Distance scope (km)
0.5,1,2,5,10,25,50,100,200
Typical real-time refreshing duration
1s
File format
SOR standard format/PDF/EXCEL
Measurement duration
5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable
Storage
FLASH (EMMC)8G + TF card
Interface type
SC-PC
Remarks:
1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure, without considering the uncertainty caused by optical fiber refractivity.
3. Measuring conditions of blind zone: reflection event is within 5Km, reflection strength is 45dB. Measured by the minimum pulse width.
Specification
Size & Display
5.55 inch OLED screen display, 1280*720 resolution
Network Port
RJ45 cable TDR test
Test cable’s length,Max testing up to 600meter(optional)
Power output
5V 1A power output
UTP cable test
Test UTP cable connection status and display on the screen. Read the number on the screen.detect the near-end, mid-end and far-end fault point of RJ45 cable connector, also can test shield cable
Network test
IP Scan, PPPOE, port flashing, Ping test(optional)
Digital Cable tracer
Search BNC cable, network cable and telephone cable from the mess cables(optional)
Electroscope*(optional)
Voltage range
Frequency
50/60Hz
Alarm type
Sounds and light double alarms
Level
Visual fault locator
10mW visual fault locator with 650nm , emit red laser sources to test multi-mode and single mode fiber’s bending and breakage,
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan