Ready Stok Photomicro Autonics Bs5-K2M Terlaris

READY sebelum membeli mohon baca deskripsi terlebih dahulu Data sheet Sensing type Through-beam type Sensing distance 5mm Sensing target Opaque Min. sensing target 0.8mm2mm Hysteresis(distance) 0.05mm Response time Light ON: Max. 20, Dark ON: Max. 100 Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON/Dark ON(set by control wire) Indicator Operation indicator (red LED) Approval Weight Approx. 30g Power supply 5-24VDC 10%(ripple P-P : max. 10%) Current consumption Max. 30mA Control output NPN open collector Load voltage 30VDC Load current Max. 100mA Residual voltage NPN: 1.2VDC, PNP: 1.2VDC Protection circuit Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit Insulation resistance 20 M (250 VDC megger) Noise immunity The square wave noise (pulse width: 1) by the noise simulator 240VDC Dielectric strength 1,000VAC 50/60Hz for 1 minute Vibration 1.5mm amplitude (max. acceleration 196m/s) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours Shock 15,000 m/s (approx. 1,500G) in each X, Y, Z direction for 3 times Environment_Ambient illumination Fluorescent lamp: Max. 1,000lx(received illumination) Environment_Ambient temperature -20 to 55, storage : -25 to 85 Environment_Ambient humidity 35 to 85% RH, storage: 35 to 85% RH Protection structure IP50 (IEC standard) Connection Connector type Material Case: PBT, Sensing part: PC Untuk pengiriman gojek/gosend harap konfirmasi terlebih dahulu karena ada beberapa barang yang belum bisa kirim menggunakan gojek/gosend membeli = setuju