Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp2.543.200
DIYDrones ArduIMU+ V3 Best
Rp2.543.200
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Hardware Desember 2023
Description The ArduIMU+ V3 is the latest and greatest version of DIYDrones smart IMU. This time they’ve made it smaller and faster by incorporating the new Invensense MPU-6000 MEMS 3-axis gyro and accelerometer as well the 3-axis I2C magnetometer HMC-5883L. With the GPS port and on-board Atmega328 microprocessor, the ArduIMU+ V3 is a tiny but powerful orientation solution.
This version of the board is pin compatible with V2, but unlike V2 it’s also breadboard friendly! This device is suitable for any application from rockets to simple movement detection.
Having a hard time picking an IMU? Our Accelerometer, Gyro, and IMU Buying Guide might help!
Note The board comes with a row of right-angle headers, as shown in the pictures. They come unsoldered.
Dimensions 1.5 x 1.0
Features
3-Axis gyro with sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
3-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
Reduced settling effects and sensor drift by elimination of board-level cross-axis alignment errors between accelerometers and gyroscopes
Full Chip Idle Mode Supply Current 5µA
On-chip timing generator with ±1% frequency variation over full temperature range
User self test
g shock tolerant
Pin compatible with ArduIMU V2
The 6 analog pins are now available!
Arduino compatible and open source.
3 status LED’s (RGB).
I2C port with 3.3V translation.
GPS port with FTDI autoswitch.
Jangan lupa tanyakan stok terlebih dahulu sebelum order.
Orderan yang masuk akan segera kami proses secepatnya
Jika ada hal lain yang ingin ditanyakan atau ragu-ragu, bisa tanyakan lewat fitur Chat tokopedia
saat paket diterima, jangan lupa video unboxing ya
This version of the board is pin compatible with V2, but unlike V2 it’s also breadboard friendly! This device is suitable for any application from rockets to simple movement detection.
Having a hard time picking an IMU? Our Accelerometer, Gyro, and IMU Buying Guide might help!
Note The board comes with a row of right-angle headers, as shown in the pictures. They come unsoldered.
Dimensions 1.5 x 1.0
Features
3-Axis gyro with sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
3-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
Reduced settling effects and sensor drift by elimination of board-level cross-axis alignment errors between accelerometers and gyroscopes
Full Chip Idle Mode Supply Current 5µA
On-chip timing generator with ±1% frequency variation over full temperature range
User self test
g shock tolerant
Pin compatible with ArduIMU V2
The 6 analog pins are now available!
Arduino compatible and open source.
3 status LED’s (RGB).
I2C port with 3.3V translation.
GPS port with FTDI autoswitch.
Jangan lupa tanyakan stok terlebih dahulu sebelum order.
Orderan yang masuk akan segera kami proses secepatnya
Jika ada hal lain yang ingin ditanyakan atau ragu-ragu, bisa tanyakan lewat fitur Chat tokopedia
saat paket diterima, jangan lupa video unboxing ya
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan