Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp9.742.600
(35Pieces) 45Degree Danfoss Oil Fuel Nozzle Fule Oil Burner Nozzle
Rp9.742.600
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat Datang di Toko Kami.
- Kami Menjual Produk-produk Import
- Produk Dikirim dari Luar Negeri.
- Estimasi Kiriman 5-15 Hari. Mohon Menunggu
Model Number : Oil Burner nozzle
Metal Type : Brass
Material : Metal
Sprayer Type : Pump
Type : Sprayers
Material: : BRASS
spray angle: : 45 degree
Air pressure: : 700kg/cm3
Spray pattern: : full cone
Oring material: : Viton
Thread: : 9/26-24UNF
test Oil density: : 820kg/m3
test Oil visosity: : 3.4mm2/S
capacity: : solid from 0.3 to 9
Product Detail:
Size: 15mm 15mm 48mm
Thread diameter: 14.2mm
The flow rate is between 0.3-35#
Angles are 45 degrees
The atomization method is solid
Currently commonly used in the country is 60 degrees and 45 degrees solid
The small nozzle is a copper sand filter, the medium nozzle is a steel filter, and the large nozzle has no filter.
Light oil or heavy oil can be used.
EN series nozzle flow from 1.46 to 6.55 kg/h
Standard series nozzle flow from 0.30 to 35 USgal/h
100% factory test
Nozzle flow meter (the fuel flow rate is different under different pressures, 7bar is the nominal flow rate of the nozzle, generally multiplied by 3.122 to kg/h)
The oil burner nozzle range is widely used in a variety of burners on the market. Our nozzles are manufactured to N293 and EN299 standards and are 100% tested using state-of-the-art equipment. We recommends that nozzles be replaced annually. Even if it can still be used.
- Kami Menjual Produk-produk Import
- Produk Dikirim dari Luar Negeri.
- Estimasi Kiriman 5-15 Hari. Mohon Menunggu
Model Number : Oil Burner nozzle
Metal Type : Brass
Material : Metal
Sprayer Type : Pump
Type : Sprayers
Material: : BRASS
spray angle: : 45 degree
Air pressure: : 700kg/cm3
Spray pattern: : full cone
Oring material: : Viton
Thread: : 9/26-24UNF
test Oil density: : 820kg/m3
test Oil visosity: : 3.4mm2/S
capacity: : solid from 0.3 to 9
Product Detail:
Size: 15mm 15mm 48mm
Thread diameter: 14.2mm
The flow rate is between 0.3-35#
Angles are 45 degrees
The atomization method is solid
Currently commonly used in the country is 60 degrees and 45 degrees solid
The small nozzle is a copper sand filter, the medium nozzle is a steel filter, and the large nozzle has no filter.
Light oil or heavy oil can be used.
EN series nozzle flow from 1.46 to 6.55 kg/h
Standard series nozzle flow from 0.30 to 35 USgal/h
100% factory test
Nozzle flow meter (the fuel flow rate is different under different pressures, 7bar is the nominal flow rate of the nozzle, generally multiplied by 3.122 to kg/h)
The oil burner nozzle range is widely used in a variety of burners on the market. Our nozzles are manufactured to N293 and EN299 standards and are 100% tested using state-of-the-art equipment. We recommends that nozzles be replaced annually. Even if it can still be used.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan