One Piece Screen Printing Manual Tension Device Silk Print Equipment Pulling Clothes Stretcher DIY Shirts

One Piece Screen Printing Manual Tension Device Silk Print Equipment Pulling Clothes Stretcher DIY Shirts 1005004600068193 Pre-Order +/- Sampai Alamat 10-15 Hari FREE ONGKIR+PAJAK Garansi uang kembali jika Rusak, Beda Produk Usage : Commercial Manufacture Material : Aluminium-copper Alloy is_customized : No Model Number : dj Type : Hand Tool Parts Brand Name : SPExpressDIY Origin : Mainland China 1. First adjust the area of the mesh according to the size of the mesh frame, and then lock the movable casters 2. Select the appropriate mesh frame bracket and place it on the wire drawing machine 3. Adjust the handwheel so that the distance between the tips of the mesh frame is 5-6mm, so as to avoid the mesh yarn rupture caused by the mesh frame supporting the mesh yarn due to the increased tension of the mesh yarn during the drawing process. 4. Flatten the net yarn, fix the edge of the net yarn with the net clamp, and then slowly rotate the handwheel on the four sides of the frame to make the net yarn slowly in the tension state. Repeat this repeatedly until the tension at all parts of the net yarn is roughly equal. The size of the tension depends on the mesh number and texture of the net yarn. After the net is tensioned, it is best to use a tensiometer for the final inspection. Note: the tension of the net yarn cannot be pulled in place at one time, but must be separated several times, For example, the net pulling force is required to be 40n, first to 15N, and then to 20n after a stay of at least 5 minutes. 5. Adjust the hand wheel to make the mesh frame rise. Pay attention to the mesh frame contacting the mesh yarn evenly, and then apply Garcinia glue on the place where the mesh frame contacts the mesh yarn. Note: the mesh frame and the mesh yarn can be removed together only aft