DISKON NIPPON PAINT PYLAC T- 1G3 GREY METALLIC 1 LTRSET

Nippon Paint PYLAC 1K Basecoat System Single Component acrylic basecoat system designed to duplicate OEM Finishes in solid, and effect colours, based on a Master Tint mixing system using a 1K basecoat binder. Provides easy application, fast drying, easy spot repair. Nax Superio basecoat must be re-coated with Nax Superio clear coats to secure complete system performace Suitable Substrates Existing finishes with the exception of thermoplastic acrylic finishes All Nax Superio Primer / surfacers, with the exception of acid containing etch primer Nax Superio 1k Basecoat System 100 % Medium Thinner 100 % Spraygun : Gravity Fed nozzle 1.3-1.4 mm preassure 1.7-2.2 bar Solid colors 1. Apply 2-3 single coats till opacity achieved, with 5-10 minutes flash off time between coats Metallic/ Pearl colors 1. Apply a wet coat followed by a medium coat, with 5-10 minutes flash off time between coats 2. Apply a drop-coat for optimal metallic orientation coat by reducing the pressure to 1.5 bar (20-25psi) at the gun inlet and apply the drop coat with full trigger, increase the distance to 30 cm (12 inches). Spot Repair When making spot repairs, use lower application pressure and apply thin coats until reaching opacity. Allow for a 3-5 minutes flash-off time at 20°C between coats. Next, fade out, by extending beyond the edges, using similar application pressure. In case of metallic colors apply a drop coat (metallic orientation coat) when needed by increasing the spray gun distance. between coats 5- 10 minutes before re-coat 20 minutes (for Multi color Application nax Superio 1K Basecoat System can be re-coated with clearcoat after 20 minutes flash off time and within 24 hours.