Baby Bed Guard Fence Fall Prevention/Punch-Free Guardrail Vertical Lift Bed Baby Guard/Dual Safety Design

The cushion foam is for protection purpose, do not remove and discard it. Not suitable for skeleton beds with wide gap unless drilling The net is close fit and it needs to be very tight after installation for side protection. Should you face difficulties in zipping up the net during installation, you can zip one side, and lower the other side first before zipping it. Bed guard is suitable for mattresses up to around 30cm. You may use your mattress as a counter weight. Stability will be enhanced with more sides used. Connecting rod is optional and used for at the side with a bed head frame. Connecting rod require purchase 3 side of bed rail For the best result, you might want to consider drilling. As for the length, the guard must be shorter than your mattress dimension. Do bear in mind that the guard will be slightly shorter than the stated length (1.9m guard is approx 1.86m) Please note that the actual length of the bed guard will be shorter, this is to make sure that the guard will sit within the length of your mattress. For example, a 1.5m guard is approx.1.46m ; 1.8m guard is approx. 1.76m ; 1.9m guard is approx. 1.86m and 2.0m guard is approx. 1.96m. Bed rails are not exchangeable Or Return, Please measure your bed size accurately and pick the correct size when purchasing. 1.5m comes with 2 horizontal bars for top and bottom Tube thickness: 0.7mm​The U shape bar can only be used on 1.9m bed guard set up