Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp39.642.000
PVC SCH-80 PIPE AND FITTINGS SPEARS QUOTATION Bp. Donny
Rp39.642.000
- Kondisi: Baru
- Waktu Preorder: 4 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
BRAND : SPEARS
ORIGIN : USA
MATERIAL : Polivinil Cloride Thermoplastic Type I PVCI
STANDARD : SCH-80 PVC PVCI
Quotation dalam 1Package bisa dilihat pada halaman photo produk berikut :
TOTAL PRICE : Rp. 46,222,000,- BEST PRICE NETT
STATUS STOCK : READY PO MAX. 1-4 DAYS
VALIDITY : 1 Minggu (Harga bisa saja berubah melewati validity)
WARRANTY SPEARS ORIGINAL FITTINGS
WARRANTY Apabila fittings rusak/cacat dari pabrik (Manufacturing Defect)
Sample Engineering Specifications
●Produced by Spears Manufacturing Company from PVC Type I,
●cell classification 12454, conforming to ASTM Standard D 1784.
●All injection molded PVC Schedule 80 fittings shall be Certified for potable water service by NSF
International and manufactured instrict compliance to ASTM D 2467.
●All fabricated fittings shall be produced in accordance with Spears General Specifications for Fabricated Fittings.
●Rated for a maximum internal pressure of 150 psi
●PVC Chemical Resistance generally inert to most mineral acids, bases, salts and paraffinic hydrocarbon solutions.
WARNING !!
Spears Manufacturing Company DOES NOT RECOMMEND the use of thermoplastic piping products
for systems to transport or store compressed AIR or GASES, or the testing of thermoplastic piping systems with compressed air or gases in above and below ground locations.
ORIGIN : USA
MATERIAL : Polivinil Cloride Thermoplastic Type I PVCI
STANDARD : SCH-80 PVC PVCI
Quotation dalam 1Package bisa dilihat pada halaman photo produk berikut :
TOTAL PRICE : Rp. 46,222,000,- BEST PRICE NETT
STATUS STOCK : READY PO MAX. 1-4 DAYS
VALIDITY : 1 Minggu (Harga bisa saja berubah melewati validity)
WARRANTY SPEARS ORIGINAL FITTINGS
WARRANTY Apabila fittings rusak/cacat dari pabrik (Manufacturing Defect)
Sample Engineering Specifications
●Produced by Spears Manufacturing Company from PVC Type I,
●cell classification 12454, conforming to ASTM Standard D 1784.
●All injection molded PVC Schedule 80 fittings shall be Certified for potable water service by NSF
International and manufactured instrict compliance to ASTM D 2467.
●All fabricated fittings shall be produced in accordance with Spears General Specifications for Fabricated Fittings.
●Rated for a maximum internal pressure of 150 psi
●PVC Chemical Resistance generally inert to most mineral acids, bases, salts and paraffinic hydrocarbon solutions.
WARNING !!
Spears Manufacturing Company DOES NOT RECOMMEND the use of thermoplastic piping products
for systems to transport or store compressed AIR or GASES, or the testing of thermoplastic piping systems with compressed air or gases in above and below ground locations.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan