Atur jumlah dan catatan
Stok Total: Sisa 4
Subtotal
Rp575.000
Alat Spare Part Selam Scd adaptor scuba diving regulator din to yoke
Rp575.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Olahraga air
8485007
Our team of divers developed this accessory to change from a DIN to Yoke (INT), allowing you to use an INT (yoke) scuba tank
The must-have accessory for you regulator bag to ensure you can use your dive regulator regardless of the dive centre's tanks
Flexibility
Convert a DIN regulator so it can be used with INT valves.
TECHNICAL SPECIFICATIONS
Yoke adaptor (INT) to DIN (G5/8) female.
Length: 9 cm
Meets the standard EN 250
Adapts to all types of 232 bar or 300 bar regulators.
Caution: this adapter can be used at a maximum pressure of 232 bar only.
ROUTINE MAINTENANCE
Never use solvents or hydrocarbon-based products to clean or lubricate the regulator yourself.Never use spray cans, because the gas propellent can attack the plastic.
Use a silicone grease to lubricate the seals and increase their lifespan.
SERVICING THE REGULATORS
SUBEA-TRIBORD advises you to service your regulator every two years and to make a visual inspection at least once a year.This two inspections must be made in a SUBEA-TRIBORD certified workshop.
A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
COMPOSITION
Bottle/Body: 100.0% Brass
Cap: 80.0% Brass, 20.0% Polyamide
Our team of divers developed this accessory to change from a DIN to Yoke (INT), allowing you to use an INT (yoke) scuba tank
The must-have accessory for you regulator bag to ensure you can use your dive regulator regardless of the dive centre's tanks
Flexibility
Convert a DIN regulator so it can be used with INT valves.
TECHNICAL SPECIFICATIONS
Yoke adaptor (INT) to DIN (G5/8) female.
Length: 9 cm
Meets the standard EN 250
Adapts to all types of 232 bar or 300 bar regulators.
Caution: this adapter can be used at a maximum pressure of 232 bar only.
ROUTINE MAINTENANCE
Never use solvents or hydrocarbon-based products to clean or lubricate the regulator yourself.Never use spray cans, because the gas propellent can attack the plastic.
Use a silicone grease to lubricate the seals and increase their lifespan.
SERVICING THE REGULATORS
SUBEA-TRIBORD advises you to service your regulator every two years and to make a visual inspection at least once a year.This two inspections must be made in a SUBEA-TRIBORD certified workshop.
A service is also recommended after a particularly intensive season (more than 100 dives), or after a long period of inactivity.
COMPOSITION
Bottle/Body: 100.0% Brass
Cap: 80.0% Brass, 20.0% Polyamide
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan