IP-COM Pro-6-LR 802.11AX Dual-Band Long Range Access Point

Overview Of IP-COM Pro-6-LR 802.11AX Dual-Band Long Range Access Point

-Up to 3000 Mbps dual-band data rate
-The new WPA3 encryption mode safeguards your network security
-2.4 GHz band 2x2 MIMO with a radio rate of 574 Mbps
-5 GHz band 2x2 MIMO with a radio rate of 2402 Mbps
-Power input with 802.3at PoE

Pro-6-LR is designed based on the new Wi-Fi 6 technology. It realizes a bandwidth of 160 MHz and a 5 GHz rate as high as 2.4 Gbps, a rate three times higher than that of ordinary Wi-Fi 5 APs and two times that of ordinary Wi-Fi 6 APs. The application of such new technologies as OFDMA, spatial multiplexing, and MU-MIMO drives the network capacity of a single Pro-6-LR to 4 times higher. The high-power RF design helps maintain the quality of Wi-Fi signal even over a long distance, so that wireless clients and AP can work under the high-performance Wi-Fi 6 mode. Pro-6-LR is a perfect choice for such locations as businesses and hotels to deploy high-performance Wi-Fi networks. ProFi Controller makes it easy to manage and monitor the whole ProFi series in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.

Product Information
Model Pro 6 LR
Category Ceiling
Dimensions Φ250.6*55 mm

Hardware Specifications
Frequency band 2.4 GHz, 5 GHz
Wireless standards IEEE 802.11a/b/g/n/ac/ax
2.4 GHz data rate 1-574 Mbps
5 GHz data rate 6-2402 Mbps
Channel width 20 MHz/40 MHz/80 MHz/160 MHz
MU-MIMO 2X2 MU-MIMO
Ethernet port One 10/100/1000 Mbps Ethernet Port
One 10/100/1000 Mbps Ethernet Port (PoE)
Button 1*Reset
LED indicator RGB
Max. power consumption 15.74 W
Power supply standard IEEE 802.3at PoE
Concurrent clients 254
Antenna gain 4*4 dBi
2.4 GHz Max. output power 29+/-1.5 dBm
5 GHz Max. output power 29+/-1.5 dBm
802.11b RX sensitivity -97 dBm
2.4 GHz 802.11n (MCS7) RX sensitivity -75 dBm
5 GHz 802.11a RX sensitivity -95 dBm
5 GHz 802.11n (MCS7) RX sensitivity -75 dBm