Conductivity Transmitter EC Output 4-20mA 24Vdc 0-2200 uS/cm

*** READY STOCK, SILAHKAN DI ORDER *** *** Conductivity Transmitter 0-2200 uS/cm, Output 4-20mA, 24Vdc *** Spesifications: Working voltage: DC12-24V Power consumption: lt;1W EC range: 0-2200 uS/cm Detection accuracy: ≤ ± 2% F * S (full scale) Signal output: 4-20mA Load resistance: current output: R load≤ (Uvcc-3) /0.02Ω Working environment: temperature: 0-100 ℃, humidity: 0-100% RH Storage environment: temperature: 10-50 ℃ (-20 ~ 80 ℃ peak), humidity: 20-60% RH Dimensions: 65mm * 46mm * 28.5mm Electrode material: ABS 5m cable wire Note: This product is suitable for: electroplating, fermentation, food processing, wastewater treatment, metallurgy, environment protection Calibration procedure: 1. Clean the electrode with CO2‐free distilled water and dry it with a soft paper towel. 2. Correctly connect the transmitter power supply and electrodes. 3. Long press the calibration button until the calibration indicator light turns yellow, and then release the button. 4. Quickly press the calibration button twice until the calibration indicator flashes red, and the transmitter entersInto zeroPoint calibration processmiddle (The duration of this process is 30second),calibrationFinishPost calibration indicator redoftenBright. 5. The calibration indicator is red often Brighten the electrodeimmersionTo get ready, For range 0-2200ppm range corresponding standards liquid:1413uS/cm 6. Quickly press the calibration button once and the calibration indicator light green Flashes, the transmitter enter Calibration standard point process middle (The duration of this process is 30second),calibrationFinish post calibration indicator green color often Bright 20second, Then yellow flashes 20Second mention Show which is Will enter row The calibration data is saved. 7,Electrode quality inspection (automatic)