Density Specific Gravity Cup Pycnometer 50cc 50ml Stainless Steel

Density is the weight per unit volume at a specified temperature. 
Density determination is important measurement to convert weight into a volume unit. 
When coatings are manufactured the raw materials are measured in weight units to control the process. 
The finished product is usually sold in volume units. 
In accurate density volume measurement is fundamental to an efficient operation. 
A density cup has also been described as a liquid pycnometer. An ISO cup is a popular design globally. 
All the density cup designs work the same way having a precisely made cup with small hole in the lid to allow for removal of excess liquid and air. 


Pattern Name: 50cc/ml

Product Description 
QBB-type Gravity cup is based on national standards GB / T6750-86 to design and manufacture, applicable to the determination of the density of coatings ,auxiliary materials, fuel and other liquid , the volume is divided into 50ml, 
Technical Parameters: 
Error: 1mg (0.001%) within. 
Measuring temperature: 23 ° C ± 2 ° C 
Material: stainless steel
Size: 50cc 

Steps:： 
- Weigh the Cup when empty 
- Adjust the temperature of the density cup and test liquid to 20 ° C ± 0.5 ° C / 68 ° F ± 1.0 ° F 
- Pour the sample into the density cup 
- Close the lid no inclination, to avoid air bubbles 
- Absorb spilled liquids with an absorbent cloth 
- Weigh the Gravity Cup when full and divide the weight by the volume to determine the Specific Gravity